Champion Badger Posted January 6, 2008 Posted January 6, 2008 (edited) The Marcus is mint and a great bass. Its a superb bass for slapping and has a really, really low action. Asking £460 for it. NOW SOLD: PENDING PAYMENT The fretless is a CIJ bass I bought a few months back from Ishibashi. I then had JON Shuker put an epoxy finish on the fretboard, so not only does it have loads of Mwaah factor, it isnt't worn in any way. Also has the US Vintage pick ups. Once again, the bass is in mint condition and has the scratchplate too, as an optional extra. I am now asking £370. The fretless also has a Fender hard case Edited February 8, 2008 by Champion Badger
Geddys nose Posted January 6, 2008 Posted January 6, 2008 Thats a good price for a MM can't see that hanging around long
mikeh Posted January 6, 2008 Posted January 6, 2008 You dont fancy my 5501 Dlx for that Marcus do you?
Champion Badger Posted January 6, 2008 Author Posted January 6, 2008 Bit early to say at this stage. Thanks for the interest
NickThomas Posted January 6, 2008 Posted January 6, 2008 I have a mate looking for a MM but I'm not sure if he's after a 5 or 4 . I'll get onto him in the morning . Where are you located? Nick.
Champion Badger Posted January 6, 2008 Author Posted January 6, 2008 Might be possible. Can't promise though.
Champion Badger Posted January 7, 2008 Author Posted January 7, 2008 I did - about 5 minutes after putting up the first post of the ad, I rejigged the price. I had second thoughts and took into account the extra I paid out to have the epoxy finish on the neck done. (may include a free case though)
Champion Badger Posted January 10, 2008 Author Posted January 10, 2008 I have now added a free hardcase with the fretless.
Champion Badger Posted January 11, 2008 Author Posted January 11, 2008 It is. It took long enough for him to do, but it likes the finish you see on the Pedulla basses
Dood Posted January 12, 2008 Posted January 12, 2008 [quote name='Platypus' post='115073' date='Jan 6 2008, 10:59 PM']Andy Shuker - Who He ?[/quote] Jon's twin bass building brother lol ;o) A wonderful pair of basses! Very nice.
Champion Badger Posted January 12, 2008 Author Posted January 12, 2008 Yes, and he did as good a job as Jon, surprisingly enough
beerdragon Posted January 21, 2008 Posted January 21, 2008 [quote name='Jase' post='125004' date='Jan 21 2008, 08:28 PM']Surprised this is still here [/quote] Its a lovely looking bass. if it was'nt a fretless...
Champion Badger Posted January 21, 2008 Author Posted January 21, 2008 Not half as surprised as me. Will withdaw by the end of the week, to try and sell a different way
dmz Posted January 22, 2008 Posted January 22, 2008 Could I ask how much the epoxy job cost ? I have a Fretless Jazz with an unlined rosewood P-bass neck that is crying out for such treatment !
Champion Badger Posted January 25, 2008 Author Posted January 25, 2008 Bumpsville, but with the Marcus re-submitted
.jpg.518c69c2d9e1581799f3c11301dc2da5.jpg)
Recommended Posts