blending 2 bass rigs

[vladius13]

ok, so here's what ive done

i went and picked up a hartke h1000 with a 8x10 cab

my other set up is swr 750 x and 2 goliath 3's

i use a digitech efx processor through the efx loop of the swr where i have a efx loop control for how much i want in the mix.

the hartke does not have this.

is there a way to use the preamp out of the swr and run it into the hartke and just use the hartkes power amp side to power the cab using all the setting from the swr so i am getting the same efx loop through both?...i really want to do a 1/2 clean 1/2 efx and i can only do this with the swr efx control

[umph]

why don't you just run the hartke clean?

[deepbass5]

Late in on this one but
I agree with Umph. I use to Bi Amp with a Carvin Probass 500 which is easy as it is designed for that, but I rigged it so I only added effects on the upper freq's in the second channel amp, This is by far the best way. Keep your fundamentals clean and muscular, and the effects work best on the harmonic content top end.