StevieD_FenderP2009 Posted December 7, 2010 Share Posted December 7, 2010 (edited) Hi there I've just taken out the pre amp and pick ups from my Tobias as I'm looking to put a set of EMG's in there and making it an 18v bass. Only reason for sale is that I played my friends spector and decided I wanted a tone pump JR pre and set of EMG pick ups in my bass. Plus, I'm slowly going to change all my basses pick ups to EMG. I took them out very carefully making sure to use gloves when I was handling it so I didn't get any grease or anything like that on the pre amp board components. This here is the complete set up ready to be dropped into any bass that you want to fit it into. It's powered by a single 9v battery and there is even a clip to hold the battery in place on the pre amp board with a ribbon to safely pull it out with. The only thing I will not be including that was originally on the bass is the jack input as I need that for my bass but if you require one, I'll send a standard jack socket with it. As for the pot set up, it has 3 indented pots for the Blend, Treble and Bass with just a normal pot for the Volume control. The grounding wire will also be connected to the board for you as well. As I said, you will literally be able to drop this set up into any bass. £50 is all I want for the pre-amp and the pick ups. I can't take a penny less on them because the money needs to go towards the replacement set. Everything works perfectly fine as well. Edited February 14, 2011 by StevieD_FenderP2009 Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted February 16, 2011 Author Share Posted February 16, 2011 Come on peoplez! Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted February 16, 2011 Author Share Posted February 16, 2011 Come on... £50 for a set of pick ups and a pre-amp is an absolute bargain! Link to comment Share on other sites More sharing options...
Recommended Posts