alanbass1 Posted January 3, 2011 Share Posted January 3, 2011 (edited) I got this from Bassdirect. The reason I bought her was as a lightweight back up to my Markbass TA501 which was my main gigging amp back then and I was fed up carting my Eden WT400 in a flightcase around as the back up. Within a few weeks of getting the F500 I got a TC Electronic RH450 amp which became my main gigging amp with a 450 classic for additional power (doubling as back up). So, having used the F500 at one rehearsal only it has remained in my music room unused and the amp is in immaculate condition with no marks (sic) or scratches whatsoever. I have the original box etc. I even got the Markbass carry case which is also unused. Well. I'm looking to get a few things but in no hurry so I thought I'd put the amp up on here to see if there is any interest. I'm looking for 500 pounds (firm) for the amp and will do the amp and carry case for 545 pounds (firm). No trades or offers. Prefer pick up from Richmond, Surrey although will post at buyers cost. Some pictures: Technical blurb from the Markbass site: INPUTS INPUT impedance 500 Kohm, max. voltage 15 Vpp EFFECT RETURN impedance 22 Kohm, max. voltage 25 Vpp CONTROLS GAIN -80 dB to +25 dB range MUTE push/pull master volume pot LINE OUT LEVEL level control on front panel PRE/POST EQ (for line out) switch on rear panel MASTER VOLUME GROUND LIFT switch on rear panel EQUALIZATION LOW center frequency: 40 Hz; level: ±16 dB LOW MID (semi-parametric) frequency 100-800 Hz, level ±16 dB HIGH MID (semi-parametric) frequency 700 Hz-6 kHz, level ±16 dB HIGH center frequency: 10 kHz: ±16 dB VPF (Variable Pre-shape Filter) center frequency 380 Hz (cut) VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz (cut) OUTPUT LINE OUT balanced XLR, max. voltage 10 Vpp EFFECT SEND unbalanced, max. voltage 20 Vpp (pre-EQ) TUNER OUT unbalanced, max. voltage 25 Vpp SPEAKER OUT speakon / 1/4" (x2) OTHER WEIGHT 4.63 lbs / 2.1 kg DEPTH 10.04 in. / 25.5 cm WIDTH 10.87 in. / 27.6 cm HEIGHT 1.73 in. / 4.4 cm (1U) OUTPUT POWER 300W RMS @ 8 ohm, 500W RMS @ 4 ohm POWER REQUIREMENT 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale) Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed. Edited January 6, 2011 by alanbass1 Link to comment Share on other sites More sharing options...
LukeFRC Posted January 4, 2011 Share Posted January 4, 2011 *runs to put my amp back up for sale.* you have a collection of nice amps there! Link to comment Share on other sites More sharing options...
alanbass1 Posted January 5, 2011 Author Share Posted January 5, 2011 On hold pending the usual Link to comment Share on other sites More sharing options...
Plux_the_Duck Posted January 5, 2011 Share Posted January 5, 2011 [quote name='alanbass1' post='1078224' date='Jan 5 2011, 08:28 AM']On hold pending the usual[/quote] that was fast!!! Link to comment Share on other sites More sharing options...
alanbass1 Posted January 6, 2011 Author Share Posted January 6, 2011 And sold...thanks Drew Link to comment Share on other sites More sharing options...
drewm Posted January 7, 2011 Share Posted January 7, 2011 [quote name='alanbass1' post='1080475' date='Jan 6 2011, 09:33 PM']And sold...thanks Drew[/quote] Thanks Alan! Link to comment Share on other sites More sharing options...
Recommended Posts