3V17C Posted February 5, 2011 Share Posted February 5, 2011 or are they forever coming loose and falling off?! The original ones on my head (Klystron 1000) had the grub screw to secure them but I soon lost a couple of those... I think they must vibrate loose or something as I did check 'em and tighten 'em on more than one occasion... admittedly Ashdown did send me some free replacements which are a better fit and just push on minus the grub screw to tighten but it is quite annoying! small minor rant over. c Quote Link to comment Share on other sites More sharing options...
icastle Posted February 5, 2011 Share Posted February 5, 2011 [quote name='3V17C' post='1116424' date='Feb 5 2011, 12:28 PM']or are they forever coming loose and falling off?! The original ones on my head (Klystron 1000) had the grub screw to secure them but I soon lost a couple of those... I think they must vibrate loose or something as I did check 'em and tighten 'em on more than one occasion... admittedly Ashdown did send me some free replacements which are a better fit and just push on minus the grub screw to tighten but it is quite annoying![/quote] I usually use threadlock on grubscrews that have a tendancy to vibrate loose but a small dab of clear nail varnish on the thread before tightening it will do the same job. Quote Link to comment Share on other sites More sharing options...
indiegrungesound Posted February 5, 2011 Share Posted February 5, 2011 IMO, I think it's swings & roundabouts with Ashdown gear. When I had my Little Giant 350, the active/passive button fell off and had to be fixed back on. Whereas the buttons & dials on my old MAG combo were perfectly fine. (Probably get a Mag Head as a back up for my Hartke once I start gigging again.) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.