steve-soar Posted January 27, 2008 Share Posted January 27, 2008 I've just bought a Crown XTi 1000 amp from 6stringbassist, thanks Kev, and am wondering if I can use my GT6B as a preamp. Should I use balanced or unbalanced cables and will the output from the GT6B be hot enough? Any advice will be greatly appriciated. Cheers Steve. Quote Link to comment Share on other sites More sharing options...
BOD2 Posted January 27, 2008 Share Posted January 27, 2008 Do you have the manual ? If not you can download it [url="http://lib.roland.co.jp/manual/en/dl_04-00393/GT-6B_e3.pdf"]here[/url] According to the manual, the XLR outputs provide a line level signal suitable for input to a mixer, which should therefore be okay to drive a power amp. There's a little switch next to the XLR outs. You can set that so that the Left XLR outputs a mono signal. There's also an output level control at the rear. I would set that to the 12 o'clock position and see how that works, then increase it a bit if necessary (avoid running it at maximum if possible). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.