Jump to content
Why become a member? ×

Ampeg B500dr - 300w @ 4ohm. 500w @ 2 ohm.


lewyyy
 Share

Recommended Posts

Ampeg B500dr

I've recently bought a new amp that is quite a bit lighter so I need to recoup some of the money.

This is very useful amp I have found, you can save up to 4 preset sounds and change between them at the touch of a button.
There is Ampeg 4-way foot switches come up on ebay from time to time. (I don't have one so can't include).

It's 300w into 4ohm and 500w into 2ohm. I've used this down to 2 ohms before and its pretty powerful.

I've also used it with a SVT610 and have never needed it to be cranked up and also a Markbass 210. Both were more than enough for stages ranging from pub's to clubs.

It's lived in a rack all the time I've had it, there is a few scratches on the top from the previous owner, but these never see the light of day if its in a rackcase.

Fills 2u rackspace and weighs 32lbs

Functions excellent and there is no problems with it, what-so-ever.


The front panel has 2 inputs, pad switch, gain, ultra high, ultra low, bass, ultra mid, treble, fx blend, 4 presets, master vol, limiter, on/off.
The back has 2 speaker outs, 1 speakon out, footswitch, DI + level knob, pre amp in, power amp out, fx loop send + return

The presets can be stored by dialing in your settings and holding the chosen preset number for about 2secs.


Manual in pdf: [url="http://www.ampeg.com/pdf/B500DR.pdf"]http://www.ampeg.com/pdf/B500DR.pdf[/url]
I have a printed copy of this I'll put in the box.


Looking for £300 plus shipping


Any local people can feel free to come along and give it a go. I'm in Peterlee, Co. Durham




Edited by lewyyy
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...