tapco mixer help

[lojo]

Hi

Just wondering if anyone can help

I've got a tapco mix120 which i wish to make use of at home, but needs a power supply

I thought a trip to maplins would sort it, but they don't have any adaptors to suit

The mixer has a strange 3 pin male connector, and the similar one in the maplins multi fittings doesn't come close to fitting

Seems the mixer is discontinued and I can't seem to find a power supply online for it

Anyone got any ideas?

Thanks

BTW the power is 18v 10w, but its the 3 pin plug part which is the issue

[Bloodaxe]

It's a Mini XLR connector, like this:

[url="http://cpc.farnell.com/1/1/4319-mini-xlr-3-pin-socket-line-ta3f-switchcraft.html"]http://cpc.farnell.com/1/1/4319-mini-xlr-3...witchcraft.html[/url]

Also the PSU is 2x18.5V @ 350mA not a single 18V one.

[gelfin]

If you can hunt down a wiring diagram I might be able to persuade my audio engineer to make one for you. He's done this for me on a few occasions. Won't be as cheap as Maplins though.

[icastle]

The last owner of Tapco was Mackie.

Mackie's UK representatives are:

LOUD Technologies Europe PLC
Unit 1 Century Point, Halifax Road.
Cressex Business Park
High Wycombe,
BUCKS, HP12 3SL, UK
Phone: + 44 (0) 1494 557 398

Email: [email protected]

Might be worth contacting them to see if they can help?

[lojo]

Thanks guys I'll look into these suggestions today

Re: making one, I think the guys time will end up being worth more than the mixer, but thankyou for the thought