Jump to content
Why become a member? ×

Yamaha BBT210S 2x10 Cabs X2


deksawyer
 Share

Recommended Posts

2 Yamaha BBT210 2x10" 4 Ohm cabs. One has never left my house and the other was bought here a couple of years ago and has had very light use. Both in tip top condition. There's feet on the bottom of one of the cabs so they're stable when stacked vertically.

I'm pretty sure these have Eminence drivers and Beyma tweeters in them. Can be used like a traditional 4x10 layout or stacked vertically.

250 W rms, 4Ω, 596 x 403 x 363 mm and only 21 kg.

£260 for the pair. Plus shipping.



cheers

D.

Edited by deksawyer
Link to comment
Share on other sites

  • 2 months later...
  • 6 months later...

I don't want to bum them up too much, but they are actually very capable cabs, in typical Yamaha fasion. Quite light for a non Neo cab and the pair together have a bigger, deeper sound compared to my Tecamp 2x12.

If I could find a suitable (and cheap) head that could handle 2 Ohms, then I'd keep them as pound for pound, I couldn't better them.

cheers

D.

Link to comment
Share on other sites

  • 2 months later...

[quote name='deksawyer' timestamp='1327341238' post='1509631']
I don't want to bum them up too much, but they are actually very capable cabs, in typical Yamaha fasion. Quite light for a non Neo cab and the pair together have a bigger, deeper sound compared to my Tecamp 2x12.

If I could find a suitable (and cheap) head that could handle 2 Ohms, then I'd keep them as pound for pound, I couldn't better them.

cheers

D.
[/quote]

I have the matching BBT500H head that I'm looking to move on... 500w into 2 ohm

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...