hen barn Posted April 19, 2011 Share Posted April 19, 2011 (edited) im selling my gear and have my sansamp rackmount rbi tech 21 for sale £150 . im based in brighton but will post at a cost the spec The 1U rackmount SansAmp RBI is a pumped-up, expanded version of the popular SansAmp Bass Driver DI pedal. In addition to Drive, Presence, and active Bass and Treble controls, the SansAmp RBI has a dedicated Mid control and an XLR Output Level control for optimum performance with PA systems. It also features an Effect Loop with a Mix 50/50 switch (for parallel or series operation), an XLR output with selectable levels, and a buffered direct XLR output to provide a dry signal. Armed with a truckload of bass amp rigs in a single rackspace, you can travel as heavy or light as you like. Include access to the most coveted classic and modern bass tones, with unlimited freedom to create your own, and the SansAmp RBI is practically mandatory for any bass player. Show up at any studio with just a SansAmp RBI and plug directly into the board for premium tones without miking. Gig with the SansAmp RBI directly through the house PA without using a separate amp. Go to a gig and run directly through the house P.A. system. Take a more "traditional" set-up to a gig with a SansAmp RBI, power amp and speaker cabinet, and run directly through the house P.A. system. SansAmp RBI main features include: Drive adjusts the overall amount of gain and overdrive. Presence brings out the upper harmonic content and attack. Blend allows you to mix the direct instrument signal with SansAmp Tube Amplifier Emulation circuitry. Active Bass and Treble controls cut or boost ±12dB. Dedicated Mid control, cut or boost ±12dB. Individual Level control for the XLR out to optimize your amp's output relative to the P.A. system. Effects Loop. Mix 50/50 switch to configure the Effects Loop in series or parallel. 1/4" rear input and XLR output with selectable levels. Buffered uneffected XLR output to run a dry signal to a separate channel. Footswitch input to engage unit. Footswitch output to chain and toggle between another SansAmp RBI. Dimensions: 19"w x 1.5"h x 5.25"d (6.25"d overall) Weight: 5 lbs. Edited April 20, 2011 by hen barn Link to comment Share on other sites More sharing options...
mike.march Posted April 19, 2011 Share Posted April 19, 2011 Pm'd Link to comment Share on other sites More sharing options...
Recommended Posts