Jump to content
Why become a member? ×

HELP!


Tom_Strutt
 Share

Recommended Posts

My 78 Jazz has just stopped working.. I have a gig tomorrow night which is getting recorded and I ideally want to use it!
I opened up the part by jack input and cant see anything lose or wrong and it was literally working 2 hours before I
discovered it wasnt working...

What can I do?

Please help!

Link to comment
Share on other sites

[quote name='Tom_Strutt' post='1208507' date='Apr 22 2011, 05:50 PM']My 78 Jazz has just stopped working.. I have a gig tomorrow night which is getting recorded and I ideally want to use it!
I opened up the part by jack input and cant see anything lose or wrong and it was literally working 2 hours before I
discovered it wasnt working...

What can I do?

Please help![/quote]

Do you have a basic multimeter and soldering iron? If so, you'll probably be fine!
Either way you need to do some basic fault-finding. First try another lead, and ideally another amp (or into a tuner or something, just so you can confirm you get no signal out). If it's not either of those, unscrew the control plate from the body with the lead plugged in, and check that the tip of the jack is actually engaged with the contact on the socket (ideally, use a multimeter set to resistance (ohms) for continuity test). Also check that the socket is clean at the contact points as corrosion can stop it working, and that there is continuity with the jack sleeve and the socket sleeve.
Next, use a multimeter to check the resistance between all the points that are supposed to be connected to earth on the control plate using a standard jazz bass wiring diagram. All the metal bodies of the pots and the jack sleeve should share a common earth with one side of the pickup. If they're all fine then check for shorts to earth/breaks in the + signal wiring (on pickups directly, with volumes down - should be 6-8k each).

Link to comment
Share on other sites

May sound stupid (probably is) but have you checked your lead..? Unlikely for both pickups or vol pots to fail at exactly the same time so I'd double check continuity of the wiring working back from the jack socket.

Link to comment
Share on other sites

[quote name='Tom_Strutt' post='1208507' date='Apr 22 2011, 05:50 PM']My 78 Jazz has just stopped working.. I have a gig tomorrow night which is getting recorded and I ideally want to use it!
I opened up the part by jack input and cant see anything lose or wrong and it was literally working 2 hours before I
discovered it wasnt working...

What can I do?

Please help![/quote]

Have you another lead and amp to check it's definitely the bass?

If you're certain that it's the bass, I had a Tele do exactly the same on me last year, it was the jack socket, sometimes the insulation just "goes" and you need a new one. An easy fix if you're half good with a soldering iron, a new jack socket from your nearest Maplins is less than two quid. That's if the bass is dead, ie. no buzzes, completely silent. If you wiggle the jack while it's plugged in do you get noise?

If you're getting constant buzzing it could be a pickup wire, could be a dead pot but usually you'd get crackling as you play before that goes altogether. To check for anything other than a jack it may take time, and a circuit tester.

Link to comment
Share on other sites

[quote name='Big_Stu' post='1208526' date='Apr 22 2011, 06:25 PM']Have you another lead and amp to check it's definitely the bass?

If you're certain that it's the bass, I had a Tele do exactly the same on me last year, it was the jack socket, sometimes the insulation just "goes" and you need a new one. An easy fix if you're half good with a soldering iron, a new jack socket from your nearest Maplins is less than two quid. That's if the bass is dead, ie. no buzzes, completely silent. If you wiggle the jack while it's plugged in do you get noise?

If you're getting constant buzzing it could be a pickup wire, could be a dead pot but usually you'd get crackling as you play before that goes altogether. To check for anything other than a jack it may take time, and a circuit tester.[/quote]

Checked Amp and Leads. For sure the bass

Link to comment
Share on other sites

[quote]Checked Amp and Leads. For sure the bass[/quote]

The way a jazz is wired, if one of the pups or vol pots fails you'll still get sound from the other. So the most likely culprit is the jack socket itself or the wiring from the jack back to the pups. Use a multimeter to check wiring continuity of all hot (signal) and cold (earth) connections if you have one

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...