Looking for manual for Trace Elliott AH350SMX

[geilerbass]

I have a Trace Elliott AH350SMX head some years back and am thinking about getting a new speaker. However, I didn't get a manual with it (since it was 2nd hand) so am not sure what impedence etc it is rated at.

Does anyone know where I can track down a copy of this manual (hard or electronic copy)? Or perhaps have any specs on it? I want to make sure that whatever cab i end up getting is matched up correctly.

Thanks!

[Dood]

[url="http://www.britishaudioservice.com/trace_operateinstru.shtml"]http://www.britishaudioservice.com/trace_operateinstru.shtml[/url] could be amongst these, I haven't looked yet.

[Merton]

[quote name='dood' post='140484' date='Feb 14 2008, 05:33 PM'][url="http://www.britishaudioservice.com/trace_operateinstru.shtml"]http://www.britishaudioservice.com/trace_operateinstru.shtml[/url] could be amongst these, I haven't looked yet.[/quote]
Pretty sure it's there. It'll be 350W at four ohms, with 2 parallel speaker outs IIRC. So 2x8 ohm cabs or 1x4 ohm

[geilerbass]

They have a generic manual for the AH*SMX range, but for some reason, my specific model isn't listed within (they have AH300SMX and then AH400SMX). I guess it may have been earlier or later release than the main range.

Still, the front/back panel diagrams match up with my amp, so I think I should be able to find all the info there.

Thanks for your help, that site's really useful to know.