joegarcia Posted May 17, 2011 Share Posted May 17, 2011 (edited) Selling my Ernie Ball 500k 6165 stereo volume/pan pedal. Top industry standard pedal. Will either work as true stereo/dual mono volume or with a flick of the side footswitch a pan pedal. Unfortunately it needs a new spring/cord, I bought one and tried to fit it myself but I think I bought the wrong one as it seems too long. May just be me doing it wrong but if not a new spring/cord kit is only a fiver. It's otherwise in pretty much perfect nick. They are still £190 new, I'm just after £60 + postage which must be a bargain. I also have an older 25k 6167 stereo volume pedal which as far as I can tell is the same as the 6165 only without the pan function. Works absolutely fine with no visible wear to the cord so plenty of life left. Few superficial marks and some velcro on the bottom but working a treat. After £60 + postage for this one too as it's fully working. BOTH SOLD Edited June 18, 2011 by joegarcia Link to comment Share on other sites More sharing options...
joegarcia Posted May 19, 2011 Author Share Posted May 19, 2011 No interest? These sell for £190 new! Will get some pics sorted today. Link to comment Share on other sites More sharing options...
Truckstop Posted May 19, 2011 Share Posted May 19, 2011 What does the pan do? Is it anything like the Tone/vol pedal that Fender do? Cheers Alex Link to comment Share on other sites More sharing options...
joegarcia Posted May 19, 2011 Author Share Posted May 19, 2011 It pans between the two outputs so you can swell between two amps. Loads of possibilities! Interested in trade offers too. Link to comment Share on other sites More sharing options...
joegarcia Posted May 22, 2011 Author Share Posted May 22, 2011 Bump. Link to comment Share on other sites More sharing options...
joegarcia Posted May 26, 2011 Author Share Posted May 26, 2011 Bump. Interested in nice bass specific drive pedals in trade. Link to comment Share on other sites More sharing options...
joegarcia Posted May 30, 2011 Author Share Posted May 30, 2011 Will entertain sensible offers. Link to comment Share on other sites More sharing options...
joegarcia Posted June 6, 2011 Author Share Posted June 6, 2011 Bump. Link to comment Share on other sites More sharing options...
partingtondan Posted June 18, 2011 Share Posted June 18, 2011 hey mate, question - if in mono mode one input and one output can you use the B output as a tuner out that can remains on but not going to an amp? just wondering if it doubles up this way cheers. Link to comment Share on other sites More sharing options...
joegarcia Posted June 18, 2011 Author Share Posted June 18, 2011 Sorry but I should have updated this sooner, both pedals are SOLD. With regards to your question I'm not sure I'm afraid, I'd guess no to be honest but could be wrong. Link to comment Share on other sites More sharing options...
Recommended Posts