Jump to content
Why become a member? ×

Fretless Porn


hillbilly deluxe

Recommended Posts

Doug Wilkes Jazz fretless...

flame maple body front, swamp ash back ( heavy)

rock maple neck with indian ebony board.

slim 62 jazz neck, truss rod adjust at body end so the slim neck at the nut is not is not weak'nd by having a truss rod hole taking away half the wood there.

schaller tuners from "dyerseve" on here ( cheers chris )

john east pre

warwick Mec gold active pups, from a thumb bass

 

loads of sustain, you could go on holliday come back and it will still be going 🙂

 

collected yesterday

 

Doug Wilkes site..

http://wilkesguitars.co.uk/

 

IMG_1021.thumb.JPG.6fd317189f099a58b07b9dc6fd45c36e.JPG

 

IMG_1026.thumb.JPG.2e923888dd5f8bc5d055c37702ee03df.JPG

 

IMG_1024.thumb.JPG.238de5537db3e13bda7cb99fce5c0084.JPG

 

IMG_1023.thumb.JPG.6cb90c11e33b69f5532f81d7f5e5481c.JPG

Edited by funkgod
  • Like 3
Link to comment
Share on other sites

On 30/08/2022 at 21:50, TheGreek said:

I've had a few fretless basses over the years haven't really got on with any of them,  till I got this Yamaha TRB 5IIF. Gorgeous tones,  lovely neck  and so, so playable. 

Get one!!

 

 

20211020_115309.jpg

20211020_115250.jpg

20211020_115331.jpg

The first fretless I ever played. In amber. It was totally awesome. I had a fretted one later, and a fretless older one a few years after that. Brilliantly built basses.

hR2CFBT.jpg

 

 

  • Like 5
Link to comment
Share on other sites

  • 3 weeks later...
On 03/09/2022 at 19:59, aguacollas said:

I’ve been playing Warwick basses for 15 years, very curious about those pickups on a jazzbass position with the East preamp. And fretless. Wow. 

not bad at all really, not brill, iv had better sounds, and its nothing to do with the bass as a jazz bass, more to do with a personel pref and more to do with the position of the pickups.

i like a back pick up to have a good toney honk to it, to use by its self or mix in a bit of neck pickup to fatten it out a bit, so i wished i had asked for the bridge pickup to be further back, infact i wish both pickups were further back, like a thumb bass, thats where the tone is, and also the john east pre i never really liked the glassy hi's, there is not really a note there, more a sort of trebbly click, great for scooped slap sound, but thats about its use, so i got on to john and he gave me some advice on taking the trebble down an octave so it has more inpact on the note.

so the next stage will be..

1, add another mec pickup between the bridge and the existing pickup, and have it wired with a 3way switch that gives you either of the two bridge pickups or both as a humbucker.

2, add another 2 way switch to take down the trebble an octive one way, and the other to keep the original hi as made.

 

so not my perfect bass, but it will be,

as a jazz fretless though its prob everything anyone else would love.

each to their own and all that.

 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...
1 hour ago, Frank Blank said:

 

They are here... I think.

This is an Alpher Mako, with a 1 piece sapele body, ask neck & Macassar ebony fingerboard.

 

They have burned the body to give it the sunburst effect.

 

All hardware is hipshot & it has a Nordstrand dual soap bar pick up, with a hidden 3 way selector switch for single coil or both coils.

 

Chris & Al make some of the best instrument in the world in my opinion. I also have another fretted 4 string & a guitar.  They are also both awesome guys.

Edited by Crawford13
  • Like 1
Link to comment
Share on other sites

  • 1 year later...
1 minute ago, AndyTravis said:

Love the Italian craftsmanship here - the position dots aren’t even in line 🫣😂

IMG_6842.jpeg

 

As any decent Italian will tell you Andy, alignment in such matters is highly overrated 👍

  • Haha 2
Link to comment
Share on other sites

Just now, Beedster said:

 

As any decent Italian will tell you Andy, alignment in such matters is highly overrated 👍

Aye. It’s like an Alfa Romeo…or Maserati…every afternoon is a Friday afternoon 😆

  • Haha 2
Link to comment
Share on other sites

My  go-to ‘bitsa’ 2 piece ash Jazz body, maple neck with ebanol fingerboard with an extra MM pickup just so I don’t have to lug 2 basses around. Strung with Rotosound Nexus which probably need replacing sometime soon!!

IMG_3959.thumb.jpeg.f6ce5655b70de64f5c75a979ce3358ab.jpeg

Edited by paul_5
  • Like 5
Link to comment
Share on other sites

Here's my lockdown bass. Dragonfly Fat Sound that i purchased from Bass Japan Direct, these are the stock photos.

I did get some Nordstrand pickups installed, but can't say i really noticed much difference in tone to what was already in there. It's a Koa top on alder body with a rosewood f/b i think, which has an expoxy type finish.

I'm very happy with it, and don't have much fretless GAS now. However, i would like to get my hands on a Fbass BNF at some point, or a Fender Victor Bailey j.

 

InShot_20210218_160824753_1296x.thumb.jpg.2b1c412b7ff939140713a638ed0608c0.jpgInShot_20210218_160346562_1296x.thumb.jpg.ca15270cc0e873d96ddec9a0df28a8a7.jpg

  • Like 6
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...