SidVicious1978 Posted May 22, 2011 Share Posted May 22, 2011 (edited) here the problem i got this bass body that was natural but someone stripped it using a heat gun now it has like a grainy patten but i would like to have the body flat [attachment=80643:P220511_17.02__01_.jpg] [attachment=80642:P220511_17.02.jpg] [attachment=80646:P220511_17.03.jpg] [attachment=80645:P220511_17.02__03_.jpg] [attachment=80644:P220511_17.03__01_.jpg] Edited May 22, 2011 by SidVicious1978 Quote Link to comment Share on other sites More sharing options...
SidVicious1978 Posted May 22, 2011 Author Share Posted May 22, 2011 bump Photo's Quote Link to comment Share on other sites More sharing options...
brensabre79 Posted May 22, 2011 Share Posted May 22, 2011 I think you'll need to strip it back to the wood with nitromors and layer up with some coats of either nitro or polyurethane. rub down between coats and you should eventually get a smooth finish back. Then you can either paint or leave it natural Quote Link to comment Share on other sites More sharing options...
SidVicious1978 Posted May 22, 2011 Author Share Posted May 22, 2011 [quote name='brensabre79' post='1240678' date='May 22 2011, 07:06 PM']I think you'll need to strip it back to the wood with nitromors and layer up with some coats of either nitro or polyurethane. rub down between coats and you should eventually get a smooth finish back. Then you can either paint or leave it natural [/quote] i got nitromors how would i layer up with some coats? Sid Quote Link to comment Share on other sites More sharing options...
Ou7shined Posted May 22, 2011 Share Posted May 22, 2011 Does no one use sandpaper any more? Quote Link to comment Share on other sites More sharing options...
LawrenceH Posted May 22, 2011 Share Posted May 22, 2011 [quote name='SidVicious1978' post='1240687' date='May 22 2011, 07:17 PM']i got nitromors how would i layer up with some coats? Sid[/quote] Looks to me like it's been done without proper sealing and grain filling. You need to use a filler to plug the grain followed by sanding flat - you can't rely on the paint alone to flat out as it shrinks over time and would require an impossible thickness at some points. Quote Link to comment Share on other sites More sharing options...
xilddx Posted May 22, 2011 Share Posted May 22, 2011 There are people who would love that body in its current incarnation. Sell it and get a body you want. Otherwise, you will be spending a LOT of time getting the body flat, ready for painting. It's time consuming, and IMO a waste of money and effort for a bog standard P Bass body, which I'm assuming it is. Quote Link to comment Share on other sites More sharing options...
Bloodaxe Posted May 22, 2011 Share Posted May 22, 2011 There's some really nice grain under there! If your heart's set on keeping it and refinishing in a solid colour, I'd personally start by keying the existing surface with either a Scotchbrite pad or fine steel wool & then fill the grain with car body Knifing Stopper. Next, cut the stopper back with 240 grit wet 'n' dry, blow over it with 400 grit to smooth it a bit more & then respray. Much as I like a nice caustic solvent, I'd avoid Nitromors in this instance as it'll just take you right back to square one. If the existing finish is sound it doesn't necessarily need stripping, so why create a load more work than you've already got? Alternatively... sand it flat so that the existing black is trapped in the open grain areas & then clear coat it. However this could end up looking like a dog's breakfast if the previous owner has used a light-coloured primer coat... only one way to find out Pete. Quote Link to comment Share on other sites More sharing options...
SidVicious1978 Posted May 22, 2011 Author Share Posted May 22, 2011 cheers guys it a 1970's fender bass body Quote Link to comment Share on other sites More sharing options...
Ou7shined Posted May 22, 2011 Share Posted May 22, 2011 [quote name='SidVicious1978' post='1240894' date='May 22 2011, 09:50 PM']cheers guys it a 1970's fender bass body[/quote] They do have a very open grain. Here's what I did with a '78 body recently. I made the conscious decision to not fill the grain and make a feature of it. Quote Link to comment Share on other sites More sharing options...
xilddx Posted May 23, 2011 Share Posted May 23, 2011 [quote name='Ou7shined' post='1240955' date='May 22 2011, 10:24 PM']They do have a very open grain. Here's what I did with a '78 body recently. I made the conscious decision to not fill the grain and make a feature of it. [/quote] WOW! Quote Link to comment Share on other sites More sharing options...
SidVicious1978 Posted May 23, 2011 Author Share Posted May 23, 2011 [quote name='Ou7shined' post='1240955' date='May 22 2011, 10:24 PM']They do have a very open grain. Here's what I did with a '78 body recently. I made the conscious decision to not fill the grain and make a feature of it. [/quote] that is pretty sexy Quote Link to comment Share on other sites More sharing options...
SidVicious1978 Posted July 11, 2011 Author Share Posted July 11, 2011 hey guys i give it some sand and sealer but the burn marks are still showing and i was hoping to spraying sunburst for that vintage fender look but would i have to spray blonde tint nitro to hide some of the dark burn marks then spray some amber and some on Sidv Quote Link to comment Share on other sites More sharing options...
Ou7shined Posted July 11, 2011 Share Posted July 11, 2011 [quote name='SidVicious1978' post='1299566' date='Jul 11 2011, 07:30 AM']hey guys i give it some sand and sealer but the burn marks are still showing and i was hoping to spraying sunburst for that vintage fender look but would i have to spray blonde tint nitro to hide some of the dark burn marks then spray some amber and some on Sidv[/quote] It would probably be better to sand them out more. Quote Link to comment Share on other sites More sharing options...
Gust0o Posted July 11, 2011 Share Posted July 11, 2011 [quote name='Ou7shined' post='1240955' date='May 22 2011, 10:24 PM']They do have a very open grain. Here's what I did with a '78 body recently. I made the conscious decision to not fill the grain and make a feature of it. [/quote] Sil and Outshined make good points - done well, this can be a fantastic feature. Perhaps sell the body on and reinvestment the monies in something more appropriate for your needs? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.