Les Posted July 4, 2011 Posted July 4, 2011 I've thought about this for 17.816 seconds and decided yes. But, I'd like a second opinion before I ad me, my bass and my amp and cab to the bands pyrotecnic show. Quote
xgsjx Posted July 4, 2011 Posted July 4, 2011 (edited) You thought 17.815 seconds too long then if you've deviated from yes. Oh, depending on your amp, it might cut the sound if you use send only as it might be a case of it sends the full signal thru the send & needs a return. Tho most amps run the send as a separate channel (Mark Bass are switchable between series & parallel). Edited July 4, 2011 by xgsjx Quote
Les Posted July 4, 2011 Author Posted July 4, 2011 Thank you, but I've had 3/4 of a bottle of red so it takes a while for the thought process's to reach their destination. I'll plug it in and be damned at the next gig. Quote
JTUK Posted July 5, 2011 Posted July 5, 2011 Should work fine... if you send ( out ) from your amp to ( in ) the tuner. It might nulify the mute option..if you have one..if you don't complete the circuit though Quote
Lfalex v1.1 Posted July 5, 2011 Posted July 5, 2011 Not only but also.... You can use the "FX return" to turn your head into a "slave" power amp for any other preamplifier you may have. Works fine on my Trace SMX Head. Quote
thumbo Posted July 5, 2011 Posted July 5, 2011 just make sure you don't run your flux capacitor out of phase or it will end with a big bang and lots of tears. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.