FS: Peavey Classic 120 mono 3u valve power amp

[Beedster]

Great power amp, lovely lovely tone. I'm hoping to replace this with a Mesa Strategy but am still a bit worried that there won't be any noticeable improvement! Still, we live and learn and the Boogie's stereo so at least i can justify it on that angle.

Original FS listing at [url="http://basschat.co.uk/index.php?showtopic=128872&hl=peavey+classic+120"]http://basschat.co.uk/index.php?showtopic=...vey+classic+120[/url]

RATED POWER
120 RMS INTO 16, 8 & 4 OHMS
( CONTINUOUS SINE WAVE WITH LESS THAT 5% THD, 40 Hz TO 20 KHZ, 120V AC)
POWER @ CLIPPING ( TYPICAL )
125 W RMS into 16,8,& 4 ohms
(Continuous sine wave with less than 5 % THD, 40 Hz to 20 kHz, 120 v AC)
FREQUENCY RESPONSE
+0, -3dB @ 100W RMS into 16,8 &4 ohms,40Hz to 20 kHz
DAMPING FACTOR
Designed for 1 @ 16,8,& 4 ohms
HUM & NOISE
78 dB below full rated power (40 Hz to 20 kHz, unweighted)
SUBSONIC FILTER
Active tube subsonic filter 18 dB/octave roll-off Cutoff frequency 40 Hz
INPUT
Input Impedance: 250K ohms
Minimum Input Level: 1V RMS, 0 dBV
DIRECT OUTPUT
Output Impedance: 270 ohms
Nominal Output Level:0.3V RMS, -10 dBV Transformer Balanced
LINE OUTPUT
Output Impedance: 10K ohms
Maximum Output Level: 23V RMS, 27 dBV


Chris

Edited July 28, 2011 by Beedster

[Beedster]

This is on hold. I'll re-list it when I get things sorted.

Edited July 24, 2011 by Beedster

[Beedster]

Mesa incoming so this is available again

[Mykesbass]

PM'd.