SVT2 Pro Feet

[waynepunkdude]

The head won't fit in my case unless I take the feet off, I know this is going to sound silly but is it OK to do so, I mean are the screws attached to the board or anything?

[Wooks79]

Had the same problem when I had an svt3pro, never had any problems from removing the feet.

[icastle]

The feet are there just to make the thing surface friendly if you're not using a case/rack.
No problem taking them off at all - they'll either be self tappers or bolts running into captive nuts\coldserts so nothing flops around inside after removing them.

[The Bass Doc]

[quote name='waynepunkdude' post='1336688' date='Aug 11 2011, 04:55 PM']The head won't fit in my case unless I take the feet off[/quote]

Are you trying to smuggle an illegal immigrant?

[beely]

I have the same thing with my SVT 4 Pro.
No problem with taking the feet off, they are just screwed into holes in the casing.
You might want to check the rear panel for holes that will take the feet.
That way you are less likely to lose them.
It just depends on the space you have in your rack lids.

[waynepunkdude]

[quote name='beely' post='1336821' date='Aug 11 2011, 06:25 PM']I have the same thing with my SVT 4 Pro.
No problem with taking the feet off, they are just screwed into holes in the casing.
You might want to check the rear panel for holes that will take the feet.
That way you are less likely to lose them.
It just depends on the space you have in your rack lids.[/quote]

Done it now, my old SVT5 had holes in the back for feet but this one has 4 feet already on the back.