Paul S Posted August 20, 2011 Share Posted August 20, 2011 When it comes to wiring various components inside a guitar together - pickups, pots, jack sockets etc - are there optimum gauge wires that should be used for each? Does it matter? For example - could I strip out wire from domestic wiring flexes and use that - say an old extension lead? Or does it have to be specific stuff? I have read that is is a good idea to use shielded cable for jacks, for example, but why? I am sure the answers are obvious but I can't find anything at this low knowledge level! Ta. Quote Link to comment Share on other sites More sharing options...
neepheid Posted August 20, 2011 Share Posted August 20, 2011 I'm not sure it matters much beyond practicality - having anacondas of cables in there will be difficult to work with, difficult to bend into position, difficult to fit into holes drilled for earth wires etc. The E/L/N wires out of household power cables is probably a bit too thick. Best get yourself to Maplin and get stuff that's a bit smaller than that. Gibson have been known to use stuff as thin as telephone wire (like in my G-3), but I'd say that seems a bit flimsy to me. So (and I'm sure someone will come in with actual dimensions) somewhere between household power wire and telephone wire will suffice. Quote Link to comment Share on other sites More sharing options...
Batfastard Posted August 20, 2011 Share Posted August 20, 2011 (edited) 1mm square core is probably the biggest you want to go with normal electrical cable such as twin and earth or flex. 16/02 guage would be better though. Depends what you can get. Edited August 20, 2011 by Batfastard Quote Link to comment Share on other sites More sharing options...
Paul S Posted August 20, 2011 Author Share Posted August 20, 2011 Ta. [url="http://www.maplin.co.uk/equipment-wire-16-0.2-6197"]So this type of stuff?[/url] Quote Link to comment Share on other sites More sharing options...
Batfastard Posted August 20, 2011 Share Posted August 20, 2011 (edited) Yes mate. Remember to twist and tin the ends of the wire and the contact on the pot/jack before solder the wire to the contact. Edited August 20, 2011 by Batfastard Quote Link to comment Share on other sites More sharing options...
Paul S Posted August 20, 2011 Author Share Posted August 20, 2011 Cheers James. How are you getting on with the Jag/Trace rig? I sort of miss it. Quote Link to comment Share on other sites More sharing options...
Batfastard Posted August 20, 2011 Share Posted August 20, 2011 [quote name='Paul S' post='1346436' date='Aug 20 2011, 03:43 PM']Cheers James. How are you getting on with the Jag/Trace rig? I sort of miss it.[/quote] Loving it mate. Fixed the horn switch on the 2x10 and put some DR Legend flats on the jag when I put some shielding in the cavities. I can honestly say I'd never sell the jag or the head. How are your barefaced cab? Quote Link to comment Share on other sites More sharing options...
Paul S Posted August 20, 2011 Author Share Posted August 20, 2011 Superb bit of kit. My back loves it, for sure, but also my ears. With the TC Classic 450 it kind of sounds like that whole trace rig all together but - and here's the best bit - weighs 12kgs + 4kg for the head. No regrets. Well, not many, but they are more to do with image and style, rather than sound - I did like the whole Trace Elliot thing. But the portability makes up for that many times over. Did the shielding fix the jag's hum? Quote Link to comment Share on other sites More sharing options...
Batfastard Posted August 20, 2011 Share Posted August 20, 2011 Yes, once I remebered to solder a wire from the copper tape to the ground on the jack. I like the sound of a 12Kg cab. Thankfully I haven't had to move the cabs around too much. See as I have two flights of stairs to negotiate with them to pet them in my room. Thinking of getting a Super12t when I finally find a band and a cheap car. Gla dto hear your move to lightwieght gear has worked out well. Quote Link to comment Share on other sites More sharing options...
Mr. Foxen Posted August 20, 2011 Share Posted August 20, 2011 Should use shielded wire to carry signal in a guitar. Gives you the earth path built in, and cuts down noise. Quote Link to comment Share on other sites More sharing options...
Batfastard Posted August 20, 2011 Share Posted August 20, 2011 True. It does make things neater as well. Quote Link to comment Share on other sites More sharing options...
EdwardHimself Posted August 20, 2011 Share Posted August 20, 2011 the currents contained within guitar circuitry are tiny so there isn't really a lower limit to what size wire you can use. In fact i would say that you should go for a smaller type of wire so that it's more flexible, takes up less space and is easier to feed into the soldering contacts. I've been using 0.25 mm[sup]2[/sup] which is very nice and flexible and fine for guitar/fx pedal wiring. Quote Link to comment Share on other sites More sharing options...
Paul S Posted August 21, 2011 Author Share Posted August 21, 2011 Appreciate the input, chaps. So just to confirm : EH - do you mean [url="http://www.maplin.co.uk/equipment-wire-7-0.2-6192"]this smaller gauge[/url]? And Mr F do you mean [url="http://www.maplin.co.uk/single-core-lapped-screen-120"]this stuff?[/url] Quote Link to comment Share on other sites More sharing options...
EdwardHimself Posted August 21, 2011 Share Posted August 21, 2011 [quote name='Paul S' post='1346922' date='Aug 21 2011, 09:29 AM']Appreciate the input, chaps. So just to confirm : EH - do you mean [url="http://www.maplin.co.uk/equipment-wire-7-0.2-6192"]this smaller gauge[/url]? And Mr F do you mean [url="http://www.maplin.co.uk/single-core-lapped-screen-120"]this stuff?[/url][/quote] Yes that's the stuff i mean. The shielded is a pretty good idea, unless you want the hot and ground wires to diverge at any point, such as when hooking up the ground to the bridge. Maybe it might be an idea if you order say a couple of metres of the shielded stuff and maybe a further metre of the 0.25 mm[sup]2[/sup] wire, just to make things a bit neater. Quote Link to comment Share on other sites More sharing options...
Paul S Posted August 21, 2011 Author Share Posted August 21, 2011 Brilliant! Thanks. Quote Link to comment Share on other sites More sharing options...
Mr. Foxen Posted August 21, 2011 Share Posted August 21, 2011 I used the white stuff from Maplins, I've nearly run out. Quote Link to comment Share on other sites More sharing options...
Protium Posted August 21, 2011 Share Posted August 21, 2011 [url="http://www.bitsbox.co.uk/cable/cable.html"]http://www.bitsbox.co.uk/cable/cable.html[/url] Third option down "Stranded Wire 16/0.2mm" @ 15p per metre, is what I prefer for wiring guitars Or a little further down is the shielded stuff @ 35p per metre Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.