Jump to content
Why become a member? ×

noiseless j type pickup?


tbonepete
 Share

Recommended Posts

You could get a humbucking pickup, most pickup manufacturers make them. Some are bonded into the case though, so you may not able able to swap. If you were feeling adventurous you could try a Lace pickup for you noiseless needs.

As for wiring, some are four conductor (in which case you just solder two wires together yourself) and some are two conductor (hard wired in series inside the pickup). It's no harder to wire in, you're soldering two wires into your pre in both cases.

Edited by Doctor J
Link to comment
Share on other sites

The DiMarzio ultra Jazz are noiseless. AFAIK they're basically wired like a split coil humbucker, and sound really good on it too. I'm sure there are other manufacturers who do the same.

As for fitting it in your old pickup casing, it may be possible, but for that it'd be worth investigating just getting some pups custom made, someone like Chistoph Dolf at bass culture pickups (http://bassculture.de/) would do that sort of work, as I'm sure would many of the UK makers.

Link to comment
Share on other sites

Seymore Duncan do a hum-cancelling version or two of their Basslines Jazz pickup - [url="http://www.seymourduncan.com/products/bass/pickups-for-jaz/4string/stkj1_classic_f/"]Classic[/url] or [url="http://www.seymourduncan.com/products/bass/pickups-for-jaz/4string/stkj2_hot_for_j/"]Hot Stack[/url] versions depending on the type of output/style of playing you're looking for. They seem to be available for either Neck or Bridge-sized routs too.

Wiring info [url="http://www.seymourduncan.com/images/products/basslines/501030-115.pdf"]here[/url]*

HTH,
Ian

*Note that this is for a standard VVT Jazz-style control plate, so you would likely need to modify it for the J/MM arrangement you have - SD hum-cancelling coils come pre-wired in series, so ground one end (green wire) and take the other end (black wire) to the 'Hot' connection on the blend pot where the original jazz-pup was wired.

Link to comment
Share on other sites

  • 2 years later...

Ancient thread resurrection...

The pickups mentioned here all seem to have the longer casing in the bridge position. Are there any noiseless Jazz with the same size casings neck and bridge? If not would buying two of the appropriate size be the same thing?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...