Jump to content
Why become a member? ×

NCD: I am a happy chappy... Barefaced content


aldude
 Share

Recommended Posts

I like even more Tubetone in my sound - between 12 and 2 o'clock on the dial, but I think this is one of the strengths of the RH450 (certainly compared to the LM Rocker or Tube) - that tube saturation (as well as being very natural sounding) is also very gradual from a hint to full fuzz. I preferred it to lots of heads with yer actual valves in the preamps. Oh, and I have a pretty compressed sound, too, so them there transients are all squished out before I start... :)

Link to comment
Share on other sites

Well I gave this a good outing last night!

First, the important stuff: this rig looks the dog's! :)

[can't seem to link to image so will try an attachment instead...]

Also, ran this thing loud for a couple of hours at least, it is a 2.67 ohm load in total but the RH450 did not break a sweat and barely got warm. So, it looks like this head can easily run three 8 ohm cabs of any variety, not just TC ones. Apparently runs to 2 ohm, so you can probably run 4 cabs (or two 4 ohms) but what I've got is plenty!

As for the sound, it is just a bit more present in the bottom end with some rumble that was not so easily achievable from the S12T. Also, having the 2x12 higher up meant I could hear it a LOT more clearly when I was close to it, which is to say most of the time. Hopefully should make me a better player in the long run as every tiny mistake is now loud as ever!

This rig pretty much gives me exactly the sound I want (with some heavy fiddling with the EQ on the head) so I am still a happy chappy. Barefaced cabs as always brilliant. The RH450 head is also brilliant and tiny, any doubters should really give it a go as the way it out to work/sound according to the specs does not necessarily translate to reality. Mind you, I have to crank up the treble side of things an awful lot as it's not a trebly voiced head.

Link to comment
Share on other sites

Don't forget there is a lot of adjustment in the tone of the RH450. You do have to spend a fair while working at it though :)

No doubt it's not for everyone but you'll be surprised what an hour of EQ'ing can do :).

I doubt I'll have to change my EQ for a VERY long time :)

Link to comment
Share on other sites

[quote name='ShergoldSnickers' timestamp='1318781814' post='1406128']
Another one for our little black book Merton. :)
[/quote]
Haha! I have now decided I no longer have Streamliner GAS coz I'm waiting on the MB500 to show up later this week. It'll last, oooh, about a week, two tops :)

Link to comment
Share on other sites

[quote name='ShergoldSnickers' timestamp='1318853232' post='1406817']
Oooooo.... be interested to see what you think when it arrives.
[/quote]

That thing looks comedy small which is good :) but has giant rubber feet which adds a massive percentage to its height. Something to chop off surely?

Though it does have two speakon outs, a big downer for the RH450, which only has one output. I got obbm to make a Y cable for my two Barefaced cabs, but I much prefer to plug cabs straight into the head. Dunno why (though there is a small advantage over daisy chaining, in that you don't have two cabs worth of power going through a single cable).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...