BassBunny Posted March 22, 2008 Share Posted March 22, 2008 (edited) Here we have a pretty scruffy Peavey 2x10 cab. It has had the horn and crossover removed and the gruill replaced. The drivers are, however fairly new. It has 2 16 Ohm Eminence Beta 10's installed so is rated at 500w RMS at 8 Ohms. I only bought it pull the speakers out for an Omni 10 build. I was actually quite amazed at how good it sounds. I was going to put a horn in it and remove the grill, adding 2 of these instead. [url="http://www.maplin.co.uk/Module.aspx?ModuleNo=3405&criteria=Speaker%20Grills&doy=22m3"]http://www.maplin.co.uk/Module.aspx?Module...ls&doy=22m3[/url] Total cost of the parts for the restoration is about £13.00. I paid £50 for it so I am looking at recouping this as the drivers are around £75 for a pair. [attachment=6745:Peavey2.JPG] Plenty more pics if required, just PM me. OR add this for a small powerful Bass Rig at around £200 [url="http://basschat.co.uk/index.php?showtopic=7844&hl=Carlsbro"]http://basschat.co.uk/index.php?showtopic=...amp;hl=Carlsbro[/url] Cheers, Stuart Edited March 29, 2008 by BassBunny Link to comment Share on other sites More sharing options...
Recommended Posts