morson93 Posted October 27, 2011 Posted October 27, 2011 [size=4][font=arial,helvetica,sans-serif]So basically, i bought the SVT-3 Pro for gigging and recording primarily, but the band fell apart before we got chance to gig, and this amp has not left the bedroom since i bought it.[/font][/size] The head is a USA made one, believe the tubes have been changed before, amazing tone, just too much for the bedroom! Brilliant condition, The cab was bought last year from GAK.co.uk for £492. It is in pristine condition, not a scratch on it, sounds incredible [url="http://imageshack.us/photo/my-images/408/picture141e.jpg/"]http://imageshack.us...icture141e.jpg/[/url] [size=4][font=arial,helvetica,sans-serif]SVT-3 Pro head:[/font][/size] [size=4][font=arial,helvetica,sans-serif][b]RMS Power Output (8 Ohms):[/b] 275-Watts [/font][/size] [b]RMS Power Output (4 Ohms):[/b] 450-Watts [b]Preamp:[/b] Tubes (3 x 12AX7) [b]Driver Tubes:[/b] 1 x 12AX7, 1 x 12AU7 [b]Power Amp:[/b] Solid-State [b]Tone Controls:[/b] 3-Band [b]Mid Tone Control:[/b] 5-Position [b]Graphic EQ:[/b] Yes, 9-Band [b]Ultra Low/High Boosts:[/b] Yes [b]Balanced Line Out:[/b] Yes, Pre/Post with Ground Lift and Level [b]Effects Loop:[/b] Yes [b]Preamp Out/Power Amp In:[/b] Yes [b]Dimensions (W x H x D inches):[/b] 19 x 3.5 x 15.5 [b]Weight:[/b] 26 Pounds http://imageshack.us/photo/my-images/407/picture142j.jpg/ [font=arial,helvetica,sans-serif]SVT 410HE Cab:[/font] [b]LF Drivers:[/b] 4 x 10” [b]Voice Coil:[/b] 2” [b]Magnet Weight (each):[/b] 30 oz [b]HF Drivers:[/b] Horn/Driver [b]Voice Coil:[/b] 1” [b]Magnet Weight (each):[/b] 8 oz [b]RMS Power Handling:[/b] 500-Watts [b]Frequency Response (-3dB):[/b] 60Hz-18kHz [b]Usable Low Frequency (-10dB):[/b] 43Hz [b]Nominal Impedance:[/b] 8-Ohms [b]Sensitivity:[/b] 98dB [b]Maximum SPL:[/b] 122dB [b]Dimensions (W x H x D inches):[/b] 24 x 25 x 16 [size=4][font=arial,helvetica,sans-serif][b]Weight:[/b] 91 Pounds[/font][/size] [url="http://imageshack.us/photo/my-images/832/picture143e.jpg/"]http://imageshack.us...icture143e.jpg/[/url] [size=4][font=arial,helvetica,sans-serif]Also for sale is my Peavey Vypyr 75w, 12" speaker, in perfect condition, great sound, very loud! tonnes of settings/effects to play around with. [/font][/size] [url="http://imageshack.us/photo/my-images/254/picture144l.jpg/"]http://imageshack.us...icture144l.jpg/[/url] [size=4][font=arial,helvetica,sans-serif]And also my little Laney RB2 bass amp, 30w, 10" speaker, great condition, perfect little starter amp![/font][/size] I'm looking to get a blackstar HT-5 and a Ampeg Micro VR stack with the money made, looking for: Ampeg setup £1100 ONO [size=4][font=arial,helvetica,sans-serif]Peavey vypyr £150[/font][/size] [size=4][font=arial, helvetica, sans-serif]Laney RB2 £60[/font][/size] [size=4][font=arial, helvetica, sans-serif]I will not trade these unless it's for one of the 2 amps listed above, and they will be pickup from Bedworth only due to weight and delivery costs.[/font][/size] [size=4][font=arial, helvetica, sans-serif]Any questions, please ask![/font][/size] Thanks guys,
nickhuge Posted December 28, 2011 Posted December 28, 2011 Hi mate, how much would you let the SVT III pro go for on its own? [email="[email protected]"][email protected][/email]
Recommended Posts