Bottle Posted November 8, 2011 Posted November 8, 2011 (edited) It pains me to part with this cab, which has been the mainstay of my bass rig for the last two-and-a-half years, but bills and an imminent move to a smaller property have prompted me to sell this incredible bass cab, plus it is stupidly heavy really. It's a real beast which is why I'm marking it as 'Collection Only' - weighs in at 41Kgs (88lbs in old money). Will comfortably fit in a small hatchback with the rear seats partially folded down. [b]SOLD[/b] This cab is in good condition, a few scuffs to the plastic edge protectors and a bit of fluff on the carpet covering. Missing knob from the tweeter attenuator, but is a 6mm split shaft pot, so no trouble getting a replacement for it if required - I personally leave it set at unity and use the heads' EQ section to turn down the tweeter.[b] SOLD[/b] Spec's are [url="http://www.bass.se/2009/ebs410.htm"]here[/url] Piccies: [attachment=92847:IMG-20111108-00044.jpg] [attachment=92848:IMG-20111108-00045.jpg] Cheers, Ian Edited February 28, 2012 by Bottle
richardd Posted November 9, 2011 Posted November 9, 2011 Hi Ian .Is this a 4 ohm cab as it says in the Specs.Thanks Rich
algmusic Posted November 9, 2011 Posted November 9, 2011 Monster cab for a tiny price.. This should go quick
tonyf Posted November 9, 2011 Posted November 9, 2011 [quote name='algmusic' timestamp='1320846435' post='1432175'] Monster cab for a tiny price.. This should go quick [/quote] +1 Fantastic cabinet. Yeah, it's not light but golly, just an amazing bit of kit. Miss mine... T
Bottle Posted November 9, 2011 Author Posted November 9, 2011 [quote name='richardd' timestamp='1320845627' post='1432162'] Hi Ian .Is this a 4 ohm cab as it says in the Specs.Thanks Rich [/quote] Hi Rich, Yes, it's 4-Ohm with an 800w power handling figure HTH, Ian
Jesso Posted January 2, 2012 Posted January 2, 2012 Just got one of these... and paid a lot more than that for it! It's an amazing cab. The weight is worth it.
Esteban Posted January 2, 2012 Posted January 2, 2012 Hi mate, would you consider posting the cab? I'm in Teesside.
Bottle Posted January 3, 2012 Author Posted January 3, 2012 [quote name='Esteban' timestamp='1325538596' post='1484232'] Hi mate, would you consider posting the cab? I'm in Teesside. [/quote] Sorry mate, it's too heavy - 40-odd Kgs, would cost a fortune
Bottle Posted January 3, 2012 Author Posted January 3, 2012 [quote name='monkeynuts' timestamp='1325538878' post='1484239'] Pm'd [/quote] And replied to!
Bottle Posted January 9, 2012 Author Posted January 9, 2012 [b]ON HOLD while I locate the source of an annoying rattle in the cab/driver.[/b]
Bottle Posted January 31, 2012 Author Posted January 31, 2012 [quote name='fluffo' timestamp='1327998868' post='1519952'] any news on this cab yet [/quote] Haven't had much chance to work on it - pending house move is taking up all my time Rest Assured, I should have some time this week(end) to delve in more detail - I'll keep everyone posted Thanks for the interest in the cab! Ian
Recommended Posts