whizzzy Posted November 12, 2011 Posted November 12, 2011 (edited) Fender neck - I bought this of a fellow BC'er a few months ago with the intention of building a Precision bitsa but when I came to fit it I realised that the neck having 22 frets instead of the usual 20 which consequently screwed the intonation as I didn't want to move the bridge. The neck is straight and the truss rod all works ok. It has a Mex serial number and is believed to have originated from a Cowpoke Precision - info here [url="http://www.bovinehost.com/currentbasses/cowpokeP.html"]http://www.bovinehos...s/cowpokeP.html[/url] [url="http://www.talkbass.com/forum/f8/pics-fender-cowpoke-special-312480/"]http://www.talkbass....special-312480/[/url] It's 64mm at the widest point on the heel, 41.5mm wide at the nut and 18mm holes for the tuners. [b]Sold. [/b][attachment=93011:F_neck2.JPG] [attachment=93012:F_neck1.JPG] Alesis M-EQ 230 stereo 31 band graphic equaliser, does what it says on the tin. Inputs via 1/4 jack or phono, little bit of rack-rash on the ears but apart from that it is good condition. All works as it should and has been racked up in a flightcase since I've had being used on monitor duties. [b]Sold[/b].[attachment=93009:Alesis1.JPG][attachment=93010:Alesis2.JPG] Soundlab Pedal Power 450 - 6 outputs at 9V each with centre pole negative. Brand new and has only been out of the plastic bag for testing to make sure its working ok. Box is a bit tatty however. [b]Sold [/b][attachment=93008:DSC_0152.JPG] Edited November 15, 2011 by whizzzy
Recommended Posts