basstech Posted December 1, 2011 Share Posted December 1, 2011 I've been using Rotosound Swing 66's for a while on a Warwick corvette five string but am getting p'd off that their tone doesn't seem to last long and they're expensive. Anyone clean strings using meths? Does it work? I think I'll try out either Warwick black labels or Elixir coated - any views/experience anyone? JB Quote Link to comment Share on other sites More sharing options...
bremen Posted December 1, 2011 Share Posted December 1, 2011 http://basschat.co.uk/topic/160775-boiling-strings/page__hl__boiling Quote Link to comment Share on other sites More sharing options...
REDLAWMAN Posted December 1, 2011 Share Posted December 1, 2011 Black Label came on my Streamer LX and were really rough on my fingers. The Elixir are lovely: still a good, high tension, but much smoother to play and the sound is lovely and bright. Quote Link to comment Share on other sites More sharing options...
brensabre79 Posted December 1, 2011 Share Posted December 1, 2011 I have this trouble with most strings (sweat like battery acid) but I find DR strings last waay longer than most. Especially the Bootzillas but they are very expensive! I use Lo Riders these days. but yes the thread Bremen pointed you to is worth a read. Meths works a treat. Quote Link to comment Share on other sites More sharing options...
LITTLEWING Posted December 3, 2011 Share Posted December 3, 2011 Elixir Nanowebs last for absolutely ages. Okay, like me, if you're a pick user, the playing end starts to look a bit tatty where the coating starts to wear off, but I think they're the bee's knees. They're a tad dear to buy initialy, but totally worth it in the long run. Quote Link to comment Share on other sites More sharing options...
tangodown87 Posted December 5, 2011 Share Posted December 5, 2011 seemed meths was the way to go from the thread i started! my stingray came with DRs on it about 6 months ago and im still rocking them now! not tried the meths trick yet though. Quote Link to comment Share on other sites More sharing options...
Rich44 Posted December 5, 2011 Share Posted December 5, 2011 (edited) [quote name='basstech' timestamp='1322756902' post='1455520'] I've been using Rotosound Swing 66's for a while on a Warwick corvette five string but am getting p'd off that their tone doesn't seem to last long and they're expensive. Anyone clean strings using meths? Does it work? I think I'll try out either Warwick black labels or Elixir coated - any views/experience anyone? JB [/quote] I always take them off and clean them with a cotton pad and a small amount of rubbing alcohol/surgical spirit (you can get it in superdrug/boots for about £2). Works a treat for me and my bass tutor commented on how my year old strings looked new so must work alright! It is scary seeing the sheer amount of gunk that comes off though! Just make sure you let them dry before putting them back on, don't want the residue drying the fretboard wood. Edited December 5, 2011 by Rich44 Quote Link to comment Share on other sites More sharing options...
jjay69 Posted January 2, 2012 Share Posted January 2, 2012 I clean my strings with meths. I've made a very simple string cleaning tube, it's 15mm diameter, sealed off at one end, just the right length for a set of 4 strings, fill it full of meths (which does not take much at all), drop the strings in, the curls at the top help to hold them in place, lean it in the corner of a room for as long as you like (usually a day or so in my case), take em out, dry them, which is very quick as it evaporates, put them in the "string next" pile. I dont think any amount of cleaning will make them sound like brand new, but i find this works really well for me. Requirements. Plastic plumbing type tube about 15mm diameter - get from local "aladins cave" type Robert Dyas hardware store Rubber cup to suit - as above held on tight with a good wrap of black insulation tape or possibly glue it on. I've also modified an old wine bottle cork with a bit of a slot to jam in the top where the curly bits of string are, just in case it should get knocked over, it should slow down any spillage. Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted January 2, 2012 Share Posted January 2, 2012 [quote name='basstech' timestamp='1322756902' post='1455520'] I've been using Rotosound Swing 66's for a while on a Warwick corvette five string but am getting p'd off that their tone doesn't seem to last long and they're expensive. Anyone clean strings using meths? Does it work? I think I'll try out either Warwick black labels or Elixir coated - any views/experience anyone? JB [/quote] I use the same strings, and don`t like them straight out of the packet, far too zingy, but also don`t like them completely dead. So I apply Fast Fret once a week, and this keeps them from deadening completely. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.