M-Bass-M Posted January 30, 2012 Posted January 30, 2012 Annoyingly, the bottom of the Octamizer isn't flat, meaning that I can't stick a piece of velcro on the bottom so that I can attach it to my pedal board. I was wondering if anybody else had experienced this same problem and had come up with a sensible solution? Cheers Mark Quote
pantherairsoft Posted January 30, 2012 Posted January 30, 2012 Take the rubber feet off. Velcro or stock a 5-6mm bit of wood or perspex to the bottom to fill the 'dip' and so it sticks over the lip by 1mm, then velcro to the board. Effectively a riser, as you would use to lift a pedal over the lip on the edge of some pedalboards. Quote
M-Bass-M Posted January 30, 2012 Author Posted January 30, 2012 Hmmm, may pop to B&Q on the way home tonight then as that sounds like a good solution. Thanks! Quote
pantherairsoft Posted January 30, 2012 Posted January 30, 2012 [quote name='M-Bass-M' timestamp='1327926264' post='1518778'] Hmmm, may pop to B&Q on the way home tonight then as that sounds like a good solution. Thanks! [/quote] No worries. Had a similar issue with my Moog MP-201. Thin bit of plywood will do the job perfect. I found an eBay shop selling Perspex/Plexi-glass and messaged them with some exact measurements for a couple of blocks. Few quid each. Quote
deej Posted January 30, 2012 Posted January 30, 2012 When I bought mine, it came with little sponge pieces to stick underneath which you could then put the velcro on. They are terrible designs though, Aguilar made a massive balls up there. Quote
.jpg.2a95db90b70ff3f3317b0f7ee3970acb.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.