N64Lover Posted February 4, 2012 Posted February 4, 2012 I just received a new cabinet this morning, a Markbass 104HF, and I am itching to try it. However, I am using it with an EA iamp350 which only has jack outputs. I am wondering if it is okay to use a jack to jack speaker cable in the speakon input on the cab? The cable does fit in there and I will be using it a low volume for now until I can get a jack to speakon (or ideally a new head, it's for sale). What do you think? Quote
xgsjx Posted February 4, 2012 Posted February 4, 2012 It depends if the socket on the cab is a dual Speakon/Jack socket or not. I think MB uses these though, but check the MB site. Quote
N64Lover Posted February 4, 2012 Author Posted February 4, 2012 I had a look there, I can seem to find any info. Quote
xgsjx Posted February 4, 2012 Posted February 4, 2012 I had a look too, there's nowt. Well there's a few MB cab users on here, so you should get your answer soon. Quote
warwickhunt Posted February 4, 2012 Posted February 4, 2012 If it fits then it'll work. Speakon connectors are a doddle to fit so just unsolder one of your jacks and fit the connector. Quote
N64Lover Posted February 4, 2012 Author Posted February 4, 2012 Great, thanks! No time for soldering right now, must...play...with...new...toy. Quote
BassBus Posted February 4, 2012 Posted February 4, 2012 Or you could just go to your local Maplins and buy one of these. [url="http://www.maplin.co.uk/speakon-to-1-4-inch-jack-heavy-duty-speaker-leads-224540"]http://www.maplin.co.uk/speakon-to-1-4-inch-jack-heavy-duty-speaker-leads-224540[/url] Quote
Stewart Posted February 4, 2012 Posted February 4, 2012 Or get an adaptor: [url="http://www.studiospares.com/adaptors/neutrik-speakon-4pin-14-jack/invt/578790/"]http://www.studiospares.com/adaptors/neutrik-speakon-4pin-14-jack/invt/578790/[/url] Quote
pete.young Posted February 4, 2012 Posted February 4, 2012 My Markbass head has a dual speakon/jack speaker output, so I would imagine they fit the same things to the speaker cabs. Quote
EdwardHimself Posted February 4, 2012 Posted February 4, 2012 Interesting my MarkBass cab has seperate jack and speakon inputs so I presume they must have retained that sort of functionality for the newer ones. Quote
Mr. Foxen Posted February 4, 2012 Posted February 4, 2012 Some speakons take a jack in the midle, if they don't, the jack won't fit. Quote
N64Lover Posted February 4, 2012 Author Posted February 4, 2012 I tried it at low volume and it seems to work fine. I just wasn't sure if it would do any damage or not. Quote
andydye Posted February 4, 2012 Posted February 4, 2012 As above, there are 2 types of speakon that I know of, one where there's a hole that a jack fits in and one with no hole... Quote
pietruszka Posted February 4, 2012 Posted February 4, 2012 I have a 104 HR, and it has 2 jack inputs and a speakon. Is the HF version any different? And a Jack wont go into the speakon bit either (butters in the fridge!). Could you not just use jack-jack? I dont think they'll be any difference ion volume/tone or any nonsense like that. Dan Quote
Ghost_Bass Posted February 6, 2012 Posted February 6, 2012 FITS DOESN'T FIT (but i believe that a few models might fit) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.