chrisdaman Posted March 15, 2012 Share Posted March 15, 2012 i've just got a "mike dirnt" p-bass with [color=#282828][font=helvetica, arial, sans-serif]Kent Armstrong P pickup and[/font][/color] Wilkinson Tuners, and i've noticed a feedback kind of sound from the guitar thats constantly there, and gets louder when the amp is turned up, i've tried all my cables and it's the same no matter what. The only thing that makes the sound go away is when i touch the volume or tone dials, or the metal plate around them, it sounds like i'm earthing the guitar when i touch it though. any idea what this could be? It's 2nd hand, and something may have been knocked whilst in transit? Cheers Chris Quote Link to comment Share on other sites More sharing options...
ratking Posted March 15, 2012 Share Posted March 15, 2012 Sounds like a typical grounding problem ... Is there a loose cable in your control cavity? Could be the electronic's grounding cable that's come loose. Could also be a bad soldering joint, might need resoldering ... Quote Link to comment Share on other sites More sharing options...
icastle Posted March 15, 2012 Share Posted March 15, 2012 [quote name='ratking' timestamp='1331824286' post='1579503'] Sounds like a typical grounding problem ... Is there a loose cable in your control cavity? Could be the electronic's grounding cable that's come loose. Could also be a bad soldering joint, might need resoldering ... [/quote] +1 It's almost certainly going to be something related to an earth connection. Quote Link to comment Share on other sites More sharing options...
chrisdaman Posted March 15, 2012 Author Share Posted March 15, 2012 ok this is promising, could it have been dislodged whilst being delivered? it covered a fair few miles from scotland to here thing is is that i dont know what i'm looking for as i'm a bit of a n00b Quote Link to comment Share on other sites More sharing options...
icastle Posted March 15, 2012 Share Posted March 15, 2012 Fortunately a PB is about as simple as it gets when it comes to electrics so lets have a go and see of we can fix it 'remotely' First thing you'll need to do is undo the screws holding the scratchpate in place, taking the strings off first would make things easier but you should be able to slide the scratchplate out if you just slacken them off. On the back of the scratchplate you'll find two pots and a jack socket. Make sure that all the wires are attached and that the soldering is shiny and neat. From one of the pots (usually the Volume control) you'll see a wire going off back into the bass body. It actually goes through a small hole in the wood and appears underneath the bridge - that's what earths the parts you are normally touching (strings). Undo the bridge screws (DEFINATELY slacken the strings off first!) and look underneath. As far as electrical connections go it's pretty pathetic - usually just a bare piece of wire coiled up. Make sure the wire isn't tarnished, position it slightly differently (so a fresh piece of bass body is going to push it against the bridge when you replace the screws). Look underneath the bridge and, again, make sure it's not tarnished. Relocate the bridge and replace the screws. If that lot looks OK then we'll need a 'plan B'. Not too sure what 'plan B' is yet but we'll worry about that if and when we get there. HTH Quote Link to comment Share on other sites More sharing options...
chrisdaman Posted March 16, 2012 Author Share Posted March 16, 2012 squier dirnt, and yeh the scratchplate is over the body, no cavaties under there i've handed it over to my mates dad, whose pretty handy with it all, hopefully he'll be able to sort it out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.