AMPEG Posted March 28, 2012 Share Posted March 28, 2012 (edited) Hi, first post on here, i normally use Ampeg gear...I have the 450 Fet head with 4x10 and 1x15 cabs, I also use a Trace 150watt combo with my Overwater percetption and 1978 Fender P bass. My question is as follows:- I have recently bought a Genz Benz STL 6.0 head and the Orange SP212 Isobaric speaker. Firstly are these compatible and secondly the GB head is so light it 'pivots' on the carrying handle of the cab. If I put the head in a 19inch rack it will overhang the cab which is only about 14inches wide (plus your looking at £130 for the rack and the mounting kit. I don't want to butcher a brand new cab by say removing the handle and putting it on the side. I'm worried that the head is so light I could easily pull it off the cab when playing.....any ideas? Other gear Cort active, Columbus P bass , Yamaha rbx, Roland 100 cube Edited March 28, 2012 by AMPEG Quote Link to comment Share on other sites More sharing options...
markstuk Posted March 28, 2012 Share Posted March 28, 2012 SP212 is an 8 Ohm cab so unlikely to have any problems with the Genz... Maybe a couple of foam blocks with velcro tape for both sides to attach the amp to the cab whilst clearing the Handle? Will help cool the Shuttle a little better as well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.