Tweeter question

[ashevans09]

Hi there,

Just got my dirty little mitts on two epifani 4x10s , and something that occured to me just now is that I now have two tweeters (one on each cab) that can be controlled individually.

So here's my question, will I get much tonal difference by running the tweeters differently? Or should I just stick to the same tweeter level on both? How will it affect tone? Unfortunately I'm not really able to test it out at this hour, but I was just wondering if anyone had had any experiences?

Ta'

Ash

[The Funk]

I would either have them both on, both off, or just have the one on.

But have a go experimenting tomorrow - you may discover some great trick that defies explanation.

[steve-soar]

Now you're just showing off, I've got 2 mids and 4 tweeters in my AccuGrooves , I leave them all full on because I prefere the sound.

[bass_ferret]

Do whatever sounds best. But if you had an 8x10 it would only have 1 tweeter but with 2 you can split the load. If you like to f*** about alot its probably best just to use 1 so you only f*** about half as much and therefore only annoy the other guys in the band half as much

When I had 2 little EBS I used to turn the tweeter off on one and just use the top one. When I started using the 212 I had the tweeter turned up more on that cos the cab was generally louder so it needed more to keep the balance. Not had a play with my new cabs yet as am still waiting for the amp