daz Posted April 3, 2012 Posted April 3, 2012 (edited) I was having a few 'vibe' troubles from my Farida today, so I did the obvious things first, such as tried to tighten the screws of the pick guard. (a few were loose) Then I thought I'd see how it was with the PG taken off. After I'd done this and the noise had gone away, I wondered if I should leave it off. So I thought I might try it 'Au natural' for a time and see how I liked it. But the screw holes seem to be eyeing me accusingly, so I think I will fill them in. No problem to re drill later if I change my mind. But now we come to the problem. How is the best way to fill them in. They don't actually need to be invisible, just not so easily seen from afar. Can anyone help with any tips ? pic below. (notice the depth of the shine captures my cameras reflection ) Edited April 3, 2012 by daz Quote
Who's Who Posted April 3, 2012 Posted April 3, 2012 What about getting some black screws and screwing all the screws back in without the pickguard. That could look pretty cool! Quote
pietruszka Posted April 3, 2012 Posted April 3, 2012 Given how dim stage lighting is at the best of times, I don't think any one would notice them anyway and so I wouldn't bother. I certainly haven't on my Sandberg. Just a thought. Dan Quote
bubinga5 Posted April 3, 2012 Posted April 3, 2012 imo i would leave it... my jazz has no pickguard and i dig it... on a side note these basses are awsome.. i played one in a shop in Chester... cant remember the shop name... had lots of pianos at the front with the guitars at the back down the stairs? Quote
MarkG3 Posted April 3, 2012 Posted April 3, 2012 [quote name='Who's Who' timestamp='1333475656' post='1602344'] What about getting some black screws and screwing all the screws back in without the pickguard. That could look pretty cool! [/quote] That's what I would do Quote
Toddy54 Posted April 3, 2012 Posted April 3, 2012 [quote name='S9_S12_Bass' timestamp='1333485157' post='1602482'] That's what I would do [/quote] Thats what I have done, looks the dogs whootsits. Quote
Roland Rock Posted April 3, 2012 Posted April 3, 2012 [quote name='Who's Who' timestamp='1333475656' post='1602344'] What about getting some black screws and screwing all the screws back in without the pickguard. That could look pretty cool! [/quote] I [i]was [/i]going to give advice on filling holes, but this is a much better idea Quote
Dad3353 Posted April 3, 2012 Posted April 3, 2012 [attachment=104115:Term.jpg] 1 - Print out 2 - Stick onto bass 3 - Done Quote
Big_Stu Posted April 3, 2012 Posted April 3, 2012 [quote name='Fat Rich' timestamp='1333478561' post='1602389'] Clear pickguard maybe? [/quote] +1, poss with the black screws too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.