Jump to content
Why become a member? ×

Soldering advice?


Jamo
 Share

Recommended Posts

Gonna swap over my pickups tomorrow. Feel comfortable enough with the practical side of things but need to buy an iron and some solder. Wondered whether anyone had any advice for me in terms of what type of solder gives the 'truest' connection and whether getting a 15 or 30 watt iron would make any real difference.

I'm thinking either will be fine but some reassurance before I get going would be nice!

Thanks basschaters!

Link to comment
Share on other sites

Either will be fine for simple wiring jobs but I'd go for a 30 watt iron on the basis that you might want to solder pots at some stage and the extra heat capacity will help a lot. Alternatively, if you're likely to start soldering small electronic components then I'd probably opt for the 15 watt one.

Solder-wise, I'm a bit out of touch with the availablility of the 'old' lead solder as I've still got a large reel of the stuff. If it is still available then I'd go for it, otherwise you'll have little choice but to go with the lead-free stuff . . . which actually might be another reason to go for the 30 watt iron because of the higher melting point of lead-free solder.

Link to comment
Share on other sites

I haven't looked back since buying a pot of flux, a little smear on every surface to be soldered and the solder runs like water onto the joints. Cleans up the joints too for less dry joints.

Link to comment
Share on other sites

[quote name='soopercrip' timestamp='1333824998' post='1607109']
[i]'Tinning' each part first (putting a blob of solder) makes life easier, you then just heat both together and jobs done[/i]

[i]Andy[/i]
[/quote]Plus to the one

Link to comment
Share on other sites

always go for the higher wattage iron - the contact time needed is less and thus theres less chance to overheat and damage stuff. It will also do the back of pots a lot better.
Never managed to buy any solder that didn't give a decent joint, it's good to tin everything first though (within reason, if you have any cats or fish around they don't like it, and fruit is bad, just stick to electrical comps).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...