steve-bbb Posted April 26, 2012 Share Posted April 26, 2012 (edited) up for grabs [url="http://basschat.co.uk/topic/134639-in-search-of-the-perfect-body"]http://basschat.co.u...he-perfect-body[/url] slab of elm large enough to cut a J shape body in a single piece - second slab of elm available but needs machining, is same length but only half body width collect (north kent) or pay delivery charge (shouldnt be more than £12-15 ish) Edited May 2, 2012 by steve-bbb Link to comment Share on other sites More sharing options...
Jabba_the_gut Posted April 26, 2012 Share Posted April 26, 2012 PM'd Link to comment Share on other sites More sharing options...
steve-bbb Posted April 26, 2012 Author Share Posted April 26, 2012 (edited) this is the main piece - i had this planed flat to 42mm (i think) same depth as a TRB whatever that be!) with the dimensions in mm there is a spot on one face which if you do go for a J shape you will be able to lose under the bridge pickup as i checked the position - the reverse side is spot free and similar pattern this piece has been covered both sides with clear transparent vinyl to protect and keep clean the second piece was cut from alongside the 800mm length so similar grain patterning and is about 230mm wide - has some twist so may not suitable for neck but would be more than suitable for cutting veneers for headstock - is about 50mm thick but would prob need planing down to 38-40mm at a guess to remove the twist Edited April 26, 2012 by steve-bbb Link to comment Share on other sites More sharing options...
steve-bbb Posted April 26, 2012 Author Share Posted April 26, 2012 on hold for Jabba pending all the usual why didnt you buggers buy my tonebender this quick!!!! Link to comment Share on other sites More sharing options...
Gizmo Posted May 4, 2012 Share Posted May 4, 2012 hey steve-bbb If this wood is still kicking about can you let me know please Cheers steve Link to comment Share on other sites More sharing options...
steve-bbb Posted May 5, 2012 Author Share Posted May 5, 2012 Hi Gizmo - thanks for the interest but sorry its gone to Jabba Link to comment Share on other sites More sharing options...
Gizmo Posted May 5, 2012 Share Posted May 5, 2012 (edited) Cool thx for the reply Edited May 5, 2012 by Gizmo Link to comment Share on other sites More sharing options...
Recommended Posts