Jump to content
Why become a member? ×

Recommended Posts

Posted

May seem like a silly question question but I am new to effects and have tried using my electo harmonix bass big muff live and it loses a lot of bottom end , do I need to play through 2 cabs and split the effects ?

Posted

[quote name='gub' timestamp='1336294319' post='1643521']
May seem like a silly question question but I am new to effects and have tried using my electo harmonix bass big muff live and it loses a lot of bottom end , do I need to play through 2 cabs and split the effects ?
[/quote]
that is a good option if you are able to.

otherwise get a blender like a boss LS-2, which will split your signal, allowing you to blend your clean tone in with the effected signal.

Posted

Cheers Phil , jack is am not sure mate as stopped using it a while ago and can't even remember tbh , will give it another go in rehearsal and have a fiddle with the settings .

Posted

[quote name='Mr. Foxen' timestamp='1336344424' post='1644393']
Sure its not mid you are missing?
[/quote]

This tends to be the bit that goes missing... and never quite comes back, with the Big Muff. Bottom end should be fine, if you roll the tone off.

Posted

I must admit I have not tried it through the terror yet , will have a play around with it on wednesday , cheers for advice guys ;)

Posted

It does have a bass boost setting as well remember, try that with the tone past 12. The problem I have with mine is that the toggle switch is broken in that position to I don't have any other option! It really comes in useful for dance tunes though, Tone at about 11:00, sustain at about 1:00 brings out some nice sub frequencies B) I use it with a Danelectro FAB chorus and it sounds deeper than the abyss itself!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...