sshorepunk Posted May 22, 2012 Share Posted May 22, 2012 Blew a KT88 at weekend, also a couple of Sheild resistors for the valve Silly mistake, was rushing after having to unexpectedly set a PA up at a gig! I took a cab with me that was 16ohms, it's one half of two 16 ohm cabs for a total of 8 ohms. Nice compact cab, figured running it out of my GT200 8 ohm output would be cool, even tested it the night before! But I mangled to put into into the 4 ohm output socket, oooops Drove to Matamp and it got sorted there and then! Valves are getting tired though, so a re valve is next Great service from Matamp, but there is a moral in this story somewhere :-) Tony Quote Link to comment Share on other sites More sharing options...
MB1 Posted May 22, 2012 Share Posted May 22, 2012 'sshorepunk' Great service from Matamp, but there is a moral in this story somewhere :-) MB1. "Should have gone to Specsavers?" Quote Link to comment Share on other sites More sharing options...
sshorepunk Posted May 22, 2012 Author Share Posted May 22, 2012 I believe you're right sir, need the specs with the built in head lamp! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.