GONE: ART SplitMix 4 Mixer - £25

[Walker]

£25 posted. As new.

[b]I used this to get my MP3 player, drum machine and bass through my amp. Simples.[/b]

The ART SplitMix 4 is a fully passive hybrid mixer features 4 stereo inputs and a single stereo output,all of which are connected via TRS (Tip, Ring, Sleeve) A¼" Jack Sockets.

A few different configurations are possible with this unit, mix 4 stereo input channels down to 1 stereo output,split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications. You can even configure the SplitMix 4 as 4 stereo input channels thru 4 independent level attenuators to 4 stereo output channels.[list]
[*]Four Stereo Input Channels
[*]Stereo Output
[*]Independent stereo level controls are provided on each channel
[*]Passive Design (No Power Supply Required)
[*]Over 90dB of Attenuation
[/list]
Specifications:[list]
[*]Frequency Response: 20Hz -20kHz, +/-1dB
[*]THD: <0.005% @ 1kHz (typical)
[*]Phase Response: <10 degrees @ 20kHz
[*]Input/Output Connections: 1/4-inch TRS stereo
[*]Input Impedance: 25k -100k Ohms
[*]Output Impedance: 1k - 4k Ohms
[*]Insertion Loss: 12dB (typical)
[*]Maximum Attenuation: >90dB (typical)
[*]Channel Isolation: >90dB (typical)
[*]Power Requirements: None (fully passive)
[*]Dimensions (HxWxD in) : 1.85 x 4.6 x 4.1
[*]Dimensions (HxWxD mm) : 47 x 117 x 104
[*]Weight: 0.84 lbs / 0.38 kg
[/list]

Edited June 24, 2012 by Walker

[Walker]

I used this to get my MP3 player, drum machine and bass through my amp.

Works well, simple, solid bit of kit, no power requirments.