HADGE Posted June 12, 2012 Posted June 12, 2012 iv just put a new speaker in my ampeg 1x15 cab as the other was blown when i got the cab to get to the speaker you just pull of the front grill but now iv put a new speaker in the cab the grill falls of when i play .As anyone had this problem and how did you fix it cheers. Quote
MB1 Posted June 12, 2012 Posted June 12, 2012 MB1. Is it fixed with screws or velcro? if the latter it may not be lining up properly or needs replacing? Quote
brensabre79 Posted June 13, 2012 Posted June 13, 2012 It should be fixed in somehow, maybe this part is missing. You can get stick on velcro strips from a DIY store, one side on the cab one side on the grill and it should hold in place ok. You might need to staple the velcro strips on though, not sure how strong the glue is after hours of repeated vibration! Quote
matski Posted June 21, 2012 Posted June 21, 2012 I've had the same problem with Ampeg grilles - firstly on the 8x10 cab and then on the 1x15 and 4x10 that I currently own. In the end I just screwed them in - job done! Quote
HADGE Posted June 21, 2012 Author Posted June 21, 2012 [i][b]thanks matski i think your right it seems the only way[/b][/i] Quote
bigjohn Posted June 21, 2012 Posted June 21, 2012 The grille on my B3158 is held in with velcro. Does the job very well. Quote
Monckyman Posted June 21, 2012 Posted June 21, 2012 As above, stapled velcro. Not B&Q 3M dual lock is very good too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.