Markbass F1 + padded MB gigbag for sale * SOLD *

[Clarky]

Looking to sell my MarkBass F1 head as I have picked up a CMD121P combo. I bought it off top dude BC'er Gareth Hughes in February (I think) and - bar a few minor cosmetic scratches on top (perhaps from having a preamp sat on it?) its in excellent condition. I have subsequently acquired a Markbass padded gigbag for it (from Thomann; here's a BC thread with another F1 pictured in the same model of gigbag [url="http://basschat.co.uk/topic/168468-markbass-f1/page__p__1554859__hl__markbass%20f1__fromsearch__1#entry1554859"]http://basschat.co.u..._1#entry1554859[/url]). In total the amp plus gigbag cost me about £490 inc post and I will sell for £450 all-in (ie, amp + gigbag + post within UK).

Specs from website:


[color=#020202][font=Georgia, Arial, Verdana][size=3][b]INPUTS[/b][/size][/font][/color]
[color=#020202][font=Georgia, Arial, Verdana][size=3]INPUT
impedance 500 Kohm, max. voltage 15 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 25 Vpp[/size][/font][/color]
[color=#020202][font=Georgia, Arial, Verdana][size=3][b]CONTROLS[/b][/size][/font][/color]
[color=#020202][font=Georgia, Arial, Verdana][size=3]GAIN
-80 dB to +25 dB range
MASTER VOLUME
GROUND LIFT
switch on rear panel[/size][/font][/color]
[color=#020202][font=Georgia, Arial, Verdana][size=3][b]EQUALIZATION[/b][/size][/font][/color]
[color=#020202][font=Georgia, Arial, Verdana][size=3]LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 10 kHz: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz-20 kHz (cut)[/size][/font][/color]

[color=#020202][font=Georgia, Arial, Verdana][size=3][b]OUTPUT[/b][/size][/font][/color]
[color=#020202][font=Georgia, Arial, Verdana][size=3]LINE OUT
balanced XLR, max. voltage 10 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 25 Vpp
SPEAKER OUT
speakon / 1/4" (x2)[/size][/font][/color]

[color=#020202][font=Georgia, Arial, Verdana][size=3][b]OTHER[/b][/size][/font][/color]
[color=#020202][font=Georgia, Arial, Verdana][size=3]WEIGHT
4.63 lbs / 2.1 kg
DEPTH
10.04 in. / 25.5 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
1.73 in. / 4.4 cm (1U)
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100V; 120V; 230V; 240V
50/60Hz[/size][/font][/color]

Edited June 23, 2012 by Clarky

[Clarky]

Sold!