mybass Posted July 4, 2012 Posted July 4, 2012 (edited) Asking price £800 but will consider very close offers..... I need to move this bass on a.s.a.p. Hopefully the mp3 sound sample has attached okay..it is a very straight forward recording into a desk and copied across, no effects or compression. 4 string fretless bass. Bass weighs in at around 6lb 12oz. SINGLE piece Swamp Ash body with 'Tru Oil' finish... 3 piece maple neck wood (some very nice figure/flame) Ebony fingerboard Walnut piece on back of headstock. Schaller 3D bridge black Schaller machine tuners black Seymour Duncan Active Jazz pups with vol/tone/vol/tone The bass was one of two (the other sold) made by me for a shop which has unfortunately been having hard times so this bass has been sitting at home. It is ungigged. The Nut width is almost 40mm The f/board is about 6mm thick and is a compound radius from approx 10" to 16". Side dot 3mm markers on the note ie. on the 'F' 'G' 'A' etc to 24 'note/fret' length. The neck thickness has been left thicker on this bass than normal as I felt the lightness of the Swamp Ash body could do with a little more meatier a neck.....at least it is there to thin down if wanted. No dedicated case for this bass. Please note....I have played mainly fretless bass for many years, designed and built for myself but also for custom orders and I have always used the best parts available as noted here, no cheapo copied parts..... Edited August 27, 2012 by mybass
BigJim Posted July 6, 2012 Posted July 6, 2012 Pete Stroud! Selling your no1 fretless bass! why mate? I can vouch for this bass, it's freeing amazing and Pete is a lovely guy who doesn't smell at all!!!
ikay Posted July 6, 2012 Posted July 6, 2012 (edited) Pete, is this the same bass as the one in this video? Nice playing by the way! [media]http://www.youtube.com/watch?v=9kN68vhHYpk[/media] Edited July 6, 2012 by ikay
mybass Posted July 6, 2012 Author Posted July 6, 2012 [quote name='ikay' timestamp='1341568431' post='1721002'] Pete, is this the same bass as the one in this video? Nice playing by the way! [media]http://www.youtube.com/watch?v=9kN68vhHYpk[/media] [/quote] iKay....well found! No it isn't the same bass as the one for sale. The one in the video is very well gigged and is slightly different in shape, pups and is UK rippled ash body wood.
mybass Posted July 6, 2012 Author Posted July 6, 2012 [quote name='Bobby K' timestamp='1341578145' post='1721203'] Very nice playing Pete [/quote] thanks Bobby K....twas a subtle sunny afternoons playing with "BAD INFLUENCE' in a country pub garden.
mybass Posted July 6, 2012 Author Posted July 6, 2012 [quote name='BigJim' timestamp='1341566527' post='1720956'] Pete Stroud! Selling your no1 fretless bass! why mate? I can vouch for this bass, it's freeing amazing and Pete is a lovely guy who doesn't smell at all!!! [/quote] BigJim..haha. thanks for giving me the 'all clear' on the cologne front.......(not the bass in video for sale....yet?)
mybass Posted July 6, 2012 Author Posted July 6, 2012 [quote name='jaydentaku' timestamp='1341583026' post='1721350'] what puppage are you using~? [/quote] The pickups on the bass for sale are Seymour Duncan Active Jazz ( JJ's I think is their defined model name). I used Seymour's for many years. The pickups on the video are "Delano" humbuckers, very nice and I would definitely try Delano jazz pups too.
mybass Posted July 18, 2012 Author Posted July 18, 2012 [quote name='mybass' timestamp='1341582824' post='1721341'] iKay....well found! No it isn't the same bass as the one for sale. The one in the video is very well gigged and is slightly different in shape, pups and is UK rippled ash body wood. [/quote] forgot to add that I'm using a Markbass 15 traveller, traveller 2x10 and Markbass LMK
mybass Posted July 26, 2012 Author Posted July 26, 2012 [quote name='mybass' timestamp='1341417012' post='1718682'] I need to move this bass on now to make way for others! mp3 sound sample added..very straight forward recording into a desk and copied across, now effects or compression. If anyone in the Gloucester to Tewksbury/Stratford are is interested, I will be in the area from this coming sunday until tuesday. I have a 4 string fretless bass here for sale. Bass weighs in at around 6lb 12oz. SINGLE piece Swamp Ash body with 'Tru Oil' finish... 3 piece maple neck wood (some very nice figure/flame) Ebony fingerboard Walnut piece on back of headstock. Schaller 3D bridge black Schaller machine tuners black Seymour Duncan Active Jazz pups vol/tone/vol/tone Asking price £800 The bass was one of two (the other sold) made by me for a shop which has unfortunately been having hard times so this bass has been sitting at home. It is ungigged. The Nut width is almost 40mm The f/board is about 6mm thick and is a compound radius from approx 10" to 16". Side dot 3mm markers on the note. The neck thickness is thicker on this bass than normal as I felt the lightness of the Swamp Ash body could do with a little more meatier a neck.....at least it is there to thin down if wanted. No dedicated case for this bass. Please note....I have played fretless bass for many years, designed and built for myself and custom orders and use some of the best parts available, no cheapo copied parts..... [/quote] BUMPING it up
mybass Posted July 29, 2012 Author Posted July 29, 2012 [quote name='mybass' timestamp='1341417012' post='1718682'] I need to move this bass on now to make way for others... Hopefully the mp3 sound sample has attached okay..very straight forward recording into a desk and copied across, no effects or compression. I have a 4 string fretless bass here for sale. Bass weighs in at around 6lb 12oz. SINGLE piece Swamp Ash body with 'Tru Oil' finish... 3 piece maple neck wood (some very nice figure/flame) Ebony fingerboard Walnut piece on back of headstock. Schaller 3D bridge black Schaller machine tuners black Seymour Duncan Active Jazz pups vol/tone/vol/tone Asking price £800 The bass was one of two (the other sold) made by me for a shop which has unfortunately been having hard times so this bass has been sitting at home. It is ungigged. The Nut width is almost 40mm The f/board is about 6mm thick and is a compound radius from approx 10" to 16". Side dot 3mm markers on the note. The neck thickness is thicker on this bass than normal as I felt the lightness of the Swamp Ash body could do with a little more meatier a neck.....at least it is there to thin down if wanted. No dedicated case for this bass. Please note....I have played fretless bass for many years, designed and built for myself and custom orders and use some of the best parts available, no cheapo copied parts..... [/quote] Bump
mybass Posted August 21, 2012 Author Posted August 21, 2012 [quote name='mybass' timestamp='1341417012' post='1718682'] Asking price £800 but will consider very close offers..... I need to move this bass on a.s.a.p. Hopefully the mp3 sound sample has attached okay..it is a very straight forward recording into a desk and copied across, no effects or compression. 4 string fretless bass. Bass weighs in at around 6lb 12oz. SINGLE piece Swamp Ash body with 'Tru Oil' finish... 3 piece maple neck wood (some very nice figure/flame) Ebony fingerboard Walnut piece on back of headstock. Schaller 3D bridge black Schaller machine tuners black Seymour Duncan Active Jazz pups vol/tone/vol/tone The bass was one of two (the other sold) made by me for a shop which has unfortunately been having hard times so this bass has been sitting at home. It is ungigged. The Nut width is almost 40mm The f/board is about 6mm thick and is a compound radius from approx 10" to 16". Side dot 3mm markers on the note. The neck thickness is thicker on this bass than normal as I felt the lightness of the Swamp Ash body could do with a little more meatier a neck.....at least it is there to thin down if wanted. No dedicated case for this bass. Please note....I have played mainly fretless bass for many years, designed and built for myself also for custom orders and have always used the best parts available, no cheapo copied parts..... [/quote] BUMP
mybass Posted August 27, 2012 Author Posted August 27, 2012 [quote name='mybass' timestamp='1341417012' post='1718682'] Asking price £800 but will consider very close offers..... I need to move this bass on a.s.a.p. Hopefully the mp3 sound sample has attached okay..it is a very straight forward recording into a desk and copied across, no effects or compression. 4 string fretless bass. Bass weighs in at around 6lb 12oz. SINGLE piece Swamp Ash body with 'Tru Oil' finish... 3 piece maple neck wood (some very nice figure/flame) Ebony fingerboard Walnut piece on back of headstock. Schaller 3D bridge black Schaller machine tuners black Seymour Duncan Active Jazz pups with vol/tone/vol/tone The bass was one of two (the other sold) made by me for a shop which has unfortunately been having hard times so this bass has been sitting at home. It is ungigged. The Nut width is almost 40mm The f/board is about 6mm thick and is a compound radius from approx 10" to 16". Side dot 3mm markers on the note ie. on the 'F' 'G' 'A' etc to 24 'note/fret' length. The neck thickness has been left thicker on this bass than normal as I felt the lightness of the Swamp Ash body could do with a little more meatier a neck.....at least it is there to thin down if wanted. No dedicated case for this bass. Please note....I have played mainly fretless bass for many years, designed and built for myself but also for custom orders and I have always used the best parts available as noted here, no cheapo copied parts..... [/quote][quote name='mybass' timestamp='1345580173' post='1779155'] BUMP [/quote] BUMP
mybass Posted September 1, 2012 Author Posted September 1, 2012 [quote name='mybass' timestamp='1341417012' post='1718682'] Asking price £800 but will consider very close offers..... I need to move this bass on a.s.a.p. Hopefully the mp3 sound sample has attached okay..it is a very straight forward recording into a desk and copied across, no effects or compression. 4 string fretless bass. Bass weighs in at around 6lb 12oz. SINGLE piece Swamp Ash body with 'Tru Oil' finish... 3 piece maple neck wood (some very nice figure/flame) Ebony fingerboard Walnut piece on back of headstock. Schaller 3D bridge black Schaller machine tuners black Seymour Duncan Active Jazz pups with vol/tone/vol/tone The bass was one of two (the other sold) made by me for a shop which has unfortunately been having hard times so this bass has been sitting at home. It is ungigged. The Nut width is almost 40mm The f/board is about 6mm thick and is a compound radius from approx 10" to 16". Side dot 3mm markers on the note ie. on the 'F' 'G' 'A' etc to 24 'note/fret' length. The neck thickness has been left thicker on this bass than normal as I felt the lightness of the Swamp Ash body could do with a little more meatier a neck.....at least it is there to thin down if wanted. No dedicated case for this bass. Please note....I have played mainly fretless bass for many years, designed and built for myself but also for custom orders and I have always used the best parts available as noted here, no cheapo copied parts..... [/quote] bump
mybass Posted October 30, 2012 Author Posted October 30, 2012 [quote name='mybass' timestamp='1341417012' post='1718682'] Asking price £800 but will consider very close offers..... I need to move this bass on a.s.a.p. Hopefully the mp3 sound sample has attached okay..it is a very straight forward recording into a desk and copied across, no effects or compression. 4 string fretless bass. Bass weighs in at around 6lb 12oz. SINGLE piece Swamp Ash body with 'Tru Oil' finish... 3 piece maple neck wood (some very nice figure/flame) Ebony fingerboard Walnut piece on back of headstock. Schaller 3D bridge black Schaller machine tuners black Seymour Duncan Active Jazz pups with vol/tone/vol/tone The bass was one of two (the other sold) made by me for a shop which has unfortunately been having hard times so this bass has been sitting at home. It is ungigged. The Nut width is almost 40mm The f/board is about 6mm thick and is a compound radius from approx 10" to 16". Side dot 3mm markers on the note ie. on the 'F' 'G' 'A' etc to 24 'note/fret' length. The neck thickness has been left thicker on this bass than normal as I felt the lightness of the Swamp Ash body could do with a little more meatier a neck.....at least it is there to thin down if wanted. No dedicated case for this bass. Please note....I have played mainly fretless bass for many years, designed and built for myself but also for custom orders and I have always used the best parts available as noted here, no cheapo copied parts..... [/quote] Bump .... for maybe the last time before .......... xmas!
.jpg.518c69c2d9e1581799f3c11301dc2da5.jpg)
Recommended Posts