Root-Note Posted July 21, 2012 Share Posted July 21, 2012 Hi, Since I bought my bass I have used the strings that came with it which are those generic low gauge ones, and recently I have become tired of the amount of slack that they produce. I was hoping that whoever reads this could give me an idea of what make of strings to look at, the bass I own is a Squire Jazz Bass and I was thinking that a gauge 50- 100/ 105 would get rid of the slack (although please correct me if i'm wrong), another thing is that I'm looking for a nice thick tone and I want them to last a long time so they can get a nice warm sound once they get dirty. Thanks for reading Mike Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted July 21, 2012 Share Posted July 21, 2012 (edited) I use Rotosound Roundwounds, 50 - 100 gauge. They do add a bit of tension, so are not too slack. I use Fast Fret on them once a week, to keep a bit of life in them. I`ve had the same set on my 77 Precision for 10 months now, and they have a nice warm, almost flatwound sound too them. Edited July 21, 2012 by Lozz196 Quote Link to comment Share on other sites More sharing options...
BassBus Posted July 22, 2012 Share Posted July 22, 2012 If you're going to go for a heavier set like that you should think of having your bass setup when they are on. Going from a 'slack' set to a heavy set will change action and intonation quite a bit. Quote Link to comment Share on other sites More sharing options...
Kesh Posted July 22, 2012 Share Posted July 22, 2012 (edited) It varies between brands, but 50 - 100 isn't very balanced. The G will be tight but the E loose. Something like 45, 60, 80, 105 or 50, 65, 85, 110 would be better. Also you will probably have to adjust your truss rod. This isn't as scary as it sounds (unless you have to take the neck off). After that, action and finally intonation will need to be reset. For a warm sound that lasts, maybe try some flatwound. Jamerson never changed his very thick flats ever. Edited July 22, 2012 by Kesh Quote Link to comment Share on other sites More sharing options...
Root-Note Posted July 22, 2012 Author Share Posted July 22, 2012 Sweet, cheers guys I expected to have to adjust inotation but fortunately I've done that before on previous instruments so I have some know-how on that, also correct me if i'm wrong but are flatwounds the type of strings used on double basses or acoustic fretless basses? Quote Link to comment Share on other sites More sharing options...
heminder Posted July 22, 2012 Share Posted July 22, 2012 (edited) Yeah the tension issue is a bit of a pain. I've noticed on my 5 string that the higher strings have good tension but the lower thicker strings tend to flop around a lot more. Alex Calber mentioned this in the one and only issue of Bass Guitar Magazine I picked up. There was a manufacturer that made an evenly balanced set, but he didn't say who it was. I got a pack of Warwick Red Label strings that are 045-065-085-105-135 and hopefully they'll be a bit better than the stock ones by bass came with. Edited July 22, 2012 by heminder Quote Link to comment Share on other sites More sharing options...
chrismuzz Posted July 22, 2012 Share Posted July 22, 2012 I find for standard tuning, .050 - .110 is a bit too heavy, unless you like a very low action and don't want to bend your strings at all Quote Link to comment Share on other sites More sharing options...
Root-Note Posted July 22, 2012 Author Share Posted July 22, 2012 To be honest I enjoy heavy strings and a high/ medium action to give my fingers a challenge, but for gigs it's best to play without weights probably so I don't muck up as much, perhaps keep the high action for my practise bass. Quote Link to comment Share on other sites More sharing options...
Kesh Posted July 22, 2012 Share Posted July 22, 2012 [quote name='Root-Note' timestamp='1342977533' post='1743360'] Sweet, cheers guys I expected to have to adjust inotation but fortunately I've done that before on previous instruments so I have some know-how on that, [/quote]Intonation adjustment isn't same as truss rod adjustment, if that's what you are saying. [quote name='heminder' timestamp='1342978514' post='1743371'] Yeah the tension issue is a bit of a pain. I've noticed on my 5 string that the higher strings have good tension but the lower thicker strings tend to flop around a lot more. Alex Calber mentioned this in the one and only issue of Bass Guitar Magazine I picked up. There was a manufacturer that made an evenly balanced set, but he didn't say who it was. [/quote] CircleK http://circlekstrings.com/store/index.html sell balanced sets, and singles, but only in rounds unfortunately. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.