Jump to content
Why become a member? ×

Recommended Posts

Posted

Is there any way of playing my Trace V6 4Ohm over my Barefaced Midget 8Ohm?
I was considering selling the V6 and eden 4Ohm 4x10 but after A/Bing it against my GenzBenzShuttle6 and BarefacedMidget I dropped the idea.

The V6/Eden was just so much warmer than the Genz/Midget.
I would like to hear the V6 over Barefaced but the V6 is 4 or 2Ohm switchable and the Midget is 8 Ohm :-(
Any ideas?
I could buy a compact; 8 and 8 = 4 but it also = skint!

Cheers,

Phil.

Posted

No your not missing the point. I didn't know that it would be ok.
I was scared of damaging something.
Turns out the only thing that is damaged is my brain ;-)

Thanks for that pete, I'll give it a whirl.

Phil.

Posted

Hang on!!!!

Isn't the V6 an all valve head?

If it's got a valve power stage then you MUST match the impedance. 8ohms connected to a 4ohm tap will result in an unhappy amp.

Posted

Opinion is divided on this amp according to google, some people say running at 4ohms with an 8 ohm cab will be fine using the rule of thumb of a 100% so upto 8 and down to 2 in the 4 ohm position, flick it to 2 ohms though for smoke and flames!

Posted

[quote name='stingrayPete1977' timestamp='1343419611' post='1750631']
Opinion is divided on this amp according to google, some people say running at 4ohms with an 8 ohm cab will be fine using the rule of thumb of a 100% so upto 8 and down to 2 in the 4 ohm position, flick it to 2 ohms though for smoke and flames!
[/quote]

Just checked back through the hallowed annals of Basschat. It shouldn't blow the amp up, but if used over a long period of time will shorten the life of the valves.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...