Skamakazi Posted August 5, 2012 Share Posted August 5, 2012 (edited) Laney Richter 165W Bass Amp & Laney Richter RB410 4x10 Bass Speaker Cabinet. Both are in good working order but as I am no longer in a band I can't really justify something this size and volume for a practise amp! Due to the weight of the item it is collection only or I can deliver to anywhere between Southampton and Romsey for the cost of petrol. £300. The specifications are as follows: Laney R3H 165 Watts Rms Normal & High Amp Head With a powerful 165 watt RMS output package, the R3H is at the heart of the New Richter lineup. It carries a twin dual parametric mid system for modern tonal flexibility. The R3 is loaded with a robust 15" Custom Voiced Celestion driver and switchable HF horn. The R3H can be connected to either or both of the dedicated Richter cabinets. (R410 & R115). This unit has the quality to provide serious backline to serious players. Power RMS 165 Watts Inputs 2: Normal & High Equalisation Bass, Twin Parametric Mid (low & high), Treble Speaker connections Dual Speaker Outputs (minimum total impedance 4ohms) FX Loop(s) Yes Impedance Minimum 4 ohms Drivers N/A (Recommended for use with R410 & R115 dedicated cabinets) Cabinet Design Plywood cabinet construction. Rugged construction with metal corners, rubber feet, strap handle & kick proof metal grill Enhance Yes Compressor Switchable with "On" status light Limiter Switchable with "On" status light DI Socket Yes: Pre EQ XLR Tuner Output Socket Yes Kick Proof Metal Grill Yes Weight 12kg Dimensions (mm) 194 x 497 x 313 Laney RB410 Richter Bass Speaker Cabinet 4x10 Laney RB410 Richter Bass Speaker Cabinet 4x10 The RB410 Richter bass cabinet is loaded with 4 10" Custom Celestion and switchable HF horn, power handling 250 watts RMS, a frequency response that starts at 50Hz and goes up to 4kHz, with a sensitivity of 98dB/watt measured at 1 meter. LOUD. Specifications - RB410 Power RMS: 250 Watts. Recommended Head Amp: Laney RB9. Inputs: 2 x Jacks. Impedance: 8 Ohm Nominal Input Impedance. Drivers: 4 x 10" Custom Celestion and Switchable HF Horn. Ports: Triple Rear Ported. Kick Proof Metal Grille. Frequency Response: 50-4kHz. Sensitivity: 98dB/W at 1 Meter. Weight: 31 Kgs. Dimensions: 597 x 585 x 405mm Edited August 5, 2012 by Skamakazi Link to comment Share on other sites More sharing options...
Skamakazi Posted August 11, 2012 Author Share Posted August 11, 2012 Bump Link to comment Share on other sites More sharing options...
Recommended Posts