Jump to content
Why become a member? ×

first tweak of my truss!


lowdowner
 Share

Recommended Posts

So... after more than 1000 hours of playing on the same set of 'stock' strings I changed my warwicks to a set of Rotosound 66 heavy gauge (50-110's). After fitting them I noticed that the neck was far more bowed than before so I bit the bullet and got out my truss rod tool and gave it a 1/8 turn (maybe slightly more, my neck was *very* bowed!)

Now it's fab - I've lowered the action anyway on the E and A strings which were a little high, and checked for buzzes and rattles. All seems well. *More* than well actually and I'm excited that I might be able to control the truss rod if I need to after hearing so many scare stories of people ruining their necks.

Great new bright funky sound, and some cool looking red ended strings to boot!

I'll re-check in the morning to see how much it 'beds in', but for now it plays like a dream.

Is 1000 hours a lot of playing time from a set of strings? I've no idea!

Link to comment
Share on other sites

takes all sorts and some dont change their strings ever. I like sparkle and since I like Legacy's at only £7.99 a set I do every month or two whatever (less than 100 hours?), more frequent when recording and gigging regularly (sweaty fingers!).

Edited by RichF
Link to comment
Share on other sites

[quote name='mart' timestamp='1345325016' post='1776386']
Has the intonation coped with the change of strings and truss rod tweak?
[/quote]
You see, this is just the kind of question to fill my newbie head with doubt again :(

If you mean are all the strings relatively in-tune at different locations on the neck then I think so, if you mean something more esoteric then I don't know... :)

Link to comment
Share on other sites

[quote name='lowdowner' timestamp='1345359970' post='1776529']

You see, this is just the kind of question to fill my newbie head with doubt again :(

If you mean are all the strings relatively in-tune at different locations on the neck then I think so, if you mean something more esoteric then I don't know... :)
[/quote]
Yes, that's exactly what I mean. So now, not only are you a competent truss-rod-tweaker, but you also know how to check the most important side effect. Pat yourself on the back! :)

Link to comment
Share on other sites

Nice to hear that another fellow bassist has overcome the 'Truss-Rod Terror'! :D

If you are fore-armed with a bit of knowledge about what it is the truss rod does and that a little goes a long way etc. then you'd generally have to be a complete f*ckwit to break a bass/truss rod (assuming it doesn't have a fault and that is why the truss rod needs tweaking). However, it still scares the life out of most folks; I've worked with guitarists who have frankly been aghast when they have seen me tweak my truss rod at a rehearsal and they have been playing 20+ years, they still pay someone £40-£50 to fettle their guitar's truss rod! In fact I know one bassist who was going to sell his bass because the action was too high, 10 minutes with a set of allen keys and a screwdriver and he was quite frankly astonished at what could be done.

Link to comment
Share on other sites

[quote name='steve-bbb' timestamp='1345369566' post='1776625']
just searching the forums her e- can anybody point me in the direction of the 'idiots how to adjust your truss guide' whether on here or externally please ta muchly :D
[/quote]

I'm sure there'll be loads of others on t'interweb/youtube but this one came up recently... [url="http://www.stewmac.com/freeinfo/String_action_and_setup/i-3910.html?actn=100101&xst=3&xsr=205467"]http://www.stewmac.com/freeinfo/String_action_and_setup/i-3910.html?actn=100101&xst=3&xsr=205467[/url]

Link to comment
Share on other sites

[quote name='warwickhunt' timestamp='1345369975' post='1776628']
I'm sure there'll be loads of others on t'interweb/youtube but this one came up recently... [url="http://www.stewmac.com/freeinfo/String_action_and_setup/i-3910.html?actn=100101&xst=3&xsr=205467"]http://www.stewmac.c...st=3&xsr=205467[/url]
[/quote]

just found this...quite a nice easy to understand explanation

[url="http://youtu.be/QpTL8lenqqM"]http://youtu.be/QpTL8lenqqM[/url]

Link to comment
Share on other sites

And here - it's from Warwick, but should be common to most basses (though some truss rods are threaded the opposite way so, as with all trust rod adjustments, slowly slowly catchee monkey!) :)

http://www.warwick.de/media/manuals/Basses/WWBassManual_EN.pdf

Listen to me - an expert all of a sudden! :) :)

Link to comment
Share on other sites

anybody on here specifically with a TRB managed to adjust their rod successfully?

please let me into the secret if you have!! :D

edit - finally after a bit of gentle brute force its had a 1/4 turn :D def feels better now see how it settles down tomorrow

Edited by steve-bbb
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...