Lozz196 Posted August 21, 2012 Posted August 21, 2012 Just bought an Ampeg PF500, and the power lead is a 2-pin, whereas I need a 3-pin for UK use. Not being too good on this technical lark, I`m fairly sure I need a 13 amp power lead. Am I right? Quote
EddyGlee Posted August 21, 2012 Posted August 21, 2012 Do you mean 2 pin plug? .. you can just cut the plug off and fit a standard UK plug no probs. Quote
Bill Fitzmaurice Posted August 21, 2012 Posted August 21, 2012 If it's 2 pin, which is odd in itself, chances are it's for 110v. Quote
Lozz196 Posted August 21, 2012 Author Posted August 21, 2012 Yeah, it`s the plug that`s 2-pin. Quite happy to change a plug over, but as a power lead on Amazon is only £3, I may as well buy one of those, rather than a new plug. Quote
Lozz196 Posted August 21, 2012 Author Posted August 21, 2012 [quote name='Bill Fitzmaurice' timestamp='1345586350' post='1779263'] If it's 2 pin, which is odd in itself, chances are it's for 110v. [/quote] 2nd time it`s happened to me as well with the PFs. The amp has a selector on the back for both 110, and 230, same as my last one. Just can`t remember which lead I bought last time, doh! Quote
Bill Fitzmaurice Posted August 21, 2012 Posted August 21, 2012 [quote name='Lozz196' timestamp='1345586589' post='1779269'] 2nd time it`s happened to me as well with the PFs. The amp has a selector on the back for both 110, and 230, same as my last one. Just can`t remember which lead I bought last time, doh! [/quote]The jack on the amp should be the same in either case, the same style as used on computers. Quote
Dood Posted August 21, 2012 Posted August 21, 2012 I'm not usually a pedant, but I am so happy to see that the word 'Kettle' hasn't found it's way in to this thread! Quote
heminder Posted August 21, 2012 Posted August 21, 2012 [quote name='Bill Fitzmaurice' timestamp='1345586350' post='1779263'] If it's 2 pin, which is odd in itself, chances are it's for 110v. [/quote] Standard European plugs are 2-pin. It's only UK that uses 3 pins. Quote
EddyGlee Posted August 21, 2012 Posted August 21, 2012 The lead you have Lozz will say the rating on the IEC molded plug (the plug that goes into your amp), they're usually 6A or 10A, some are 13A. but as the PF500 power requirements are 200-240 VAC, 50-60 HZ, 125W .. any of these cables will be fine fitted with a 3A Fuse. Quote
Lozz196 Posted August 22, 2012 Author Posted August 22, 2012 Thanks Ed, I`ll sort one from Amazon. Quote
dincz Posted August 22, 2012 Posted August 22, 2012 (edited) [quote name='Bill Fitzmaurice' timestamp='1345589330' post='1779334'] The jack on the amp should be the same in either case[/quote] 230V into a jack - ouch! EDIT: I realise now it's a case of two nations divided by a common language [quote name='heminder' timestamp='1345589977' post='1779341'] It's only UK that uses 3 pins. [/quote] 3 pins everywhere in Europe unless it's a double insulated appliance. Edited August 22, 2012 by dincz Quote
Dood Posted August 22, 2012 Posted August 22, 2012 [quote name='xgsjx' timestamp='1345621625' post='1779451'] You want a Kettle lead. [/quote] Lol, thank you Quote
xgsjx Posted August 22, 2012 Posted August 22, 2012 [quote name='dood' timestamp='1345636575' post='1779748'] Lol, thank you [/quote] As much as I tried, I struggled to resist. Quote
Ghost_Bass Posted August 22, 2012 Posted August 22, 2012 (edited) Europe: UK: "European" plugs only have two pins, what could be called of a third pin (those side metal plates) are for earthing. Edit: both sockets going in to the amp are the same (like the ones used on PC's). Edited August 22, 2012 by Ghost_Bass Quote
dincz Posted August 22, 2012 Posted August 22, 2012 Here's the third pin. [attachment=116316:socket.jpg] The point being that European power sockets have an earth connection. Quote
pikeman Posted August 22, 2012 Posted August 22, 2012 When I bought a PF500 recently it came with the European two pin lead. A quick phone call to the supplier and a 3 pin lead was delivered the following day. Quote
xgsjx Posted August 22, 2012 Posted August 22, 2012 [quote name='Ghost_Bass' timestamp='1345648404' post='1779990'] Europe: UK: "European" plugs only have two pins, what could be called of a third pin (those side metal plates) are for earthing. Edit: both sockets going in to the amp are the same (like the ones used on PC's). [/quote] Fits one of these... Quote
alexclaber Posted August 22, 2012 Posted August 22, 2012 Cordless kettles are all well and good but they're a right pain the neck when you've lost your amp lead... Quote
Ghost_Bass Posted August 22, 2012 Posted August 22, 2012 [quote name='dincz' timestamp='1345648972' post='1780005'] Here's the third pin. [attachment=116316:socket.jpg] The point being that European power sockets have an earth connection. [/quote] That's fallen out of use for some time. Some (few) countries still have them and you can still find one or anther in some very old houses but nobody's using them in modern construction nowadays. These are the plugs in current use: Quote
EddyGlee Posted August 22, 2012 Posted August 22, 2012 [quote name='xgsjx' timestamp='1345650163' post='1780028'] Fits one of these... [/quote] Don't wanna spoil your fun mate .. but you really need to look at the ancient socket on the kettle you posted!! Quote
BILL POSTERS Posted August 22, 2012 Posted August 22, 2012 [quote name='EddyGlee' timestamp='1345586245' post='1779260'] Do you mean 2 pin plug? .. you can just cut the plug off and fit a standard UK plug no probs. [/quote] Done it a lot for stuff thats connected into mains spurs, But , if you cut the plug off a foriegn KETTLE LEAD, you might find that the colours are not the same as with a UK one. Theyre only cheap, and a moulded plug is a safer bet anyway imo, so why bother ? Just buy one. Quote
xgsjx Posted August 22, 2012 Posted August 22, 2012 [quote name='EddyGlee' timestamp='1345654202' post='1780112'] Don't wanna spoil your fun mate .. but you really need to look at the ancient socket on the kettle you posted!! [/quote] I spied that. It was the only pic I could get quick access at my work that would post (tried a few others but most are blocked ) Quote
EddyGlee Posted August 22, 2012 Posted August 22, 2012 [quote name='xgsjx' timestamp='1345656440' post='1780151'] I spied that. It was the only pic I could get quick access at my work that would post (tried a few others but most are blocked ) [/quote] ignore me mate .. I'm turning into my Dad lol Quote
BILL POSTERS Posted August 22, 2012 Posted August 22, 2012 [quote name='xgsjx' timestamp='1345656440' post='1780151'] I spied that. It was the only pic I could get quick access at my work that would post (tried a few others but most are blocked ) [/quote] Cant be many of those old Russell Hobbs kettles still working. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.