StevieD_FenderP2009 Posted August 23, 2012 Share Posted August 23, 2012 (edited) [s]Hey I've got a spare neck sitting around that I thought I would off load as I'm needing to raise some cash to fund other purchases (new amp mainly). Anyway, it's an 80's Squier Jazz Bass neck but stupidly, I have removed the logo and serial number from it when I was prepping it to go on my 1987 Fender Precision Bass restoration. I never did get round to adding a new logo so it's ready to have any logo applied. The neck is in 9/10 condition with the only "damage" being a few dings round the edge of the headstock. Beautiful grain on the rosewood fretboard and the back of it is seriously smooth from where I used a really fine grit sand paper and just went over it. I won't be including machine heads with it but I will install the spare string tree I have (if I can find it) as well as throw in a neck plate and 4 bolts for it. (note, it will just be a plain chrome 4 hole neck plate). It of course has the skunk stripe down the back and something which I find to now be a personal preference on any neck I use, it has the black plastic insert on the truss rod hole which looks cool and stops the allen key from twisting awkwardly/damaging the truss hole when doing adjustments. Plenty of life left in the frets with hardly any fret-wear either! Price wise I'm looking for £60 plus shipping or it can be picked up from mine (based just off Junction 12 of the M1). I think that's a fair price considering the quality of the neck. This is the only picture I have right now, I'll try and get some more over the weekend if it isn't gone by then... Show me your moolah! Stevie.D[/s] This neck is now gone! Cheers Dean! Edited August 27, 2012 by StevieD_FenderP2009 Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted August 24, 2012 Author Share Posted August 24, 2012 BUUUUUY MY BASS NECK NOW, COME ON! (to the tune of "Celebrate") Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted August 26, 2012 Author Share Posted August 26, 2012 44 hour later bump Link to comment Share on other sites More sharing options...
Recommended Posts