S1 switching

[thinman]

Has anyone got a S1 switching schematic for a Jazz? I had a brief look as this must have been asked before but couldn't find what I wanted. If not I'm sure I could work it out but I'm not sure if the pick-ups are wired in phase or anti-phase when in series.

Also, does any one have a recommended supplier of the appropriate push-pull pot? I don't want to fit a separate switch. I assume it's usually the tone pot that's used for switching?

[King Tut]

No mate - it's the neck volume pot that's used for switching.

[Muppet]

Here you go - all on the Fender website, however, the S1 switch is specific to Fender and not a regular push-pull pot. Not that a regular push pull won't do the job cos it will....

[url="http://www.fender.com/support/diagrams/pdf_temp1/basses/0193460_62A/SD0193460_62APg2.pdf"]http://www.fender.com/support/diagrams/pdf...3460_62APg2.pdf[/url]

Cheers

Steve

[thinman]

Blimey - that was quick. Thanks. I suspect a DPDT switch will do - I'll try to work it out.

[Muppet]

There was a chap on here that had a set of pots wired to a control plate that he put up for sale. It wasn't a S1 switch but was wired to perform the same function. maybe he might be able to help you out. I found the thread, it's [url="http://basschat.co.uk/index.php?showtopic=14711&hl=S1"]here[/url]