zranyard Posted October 28, 2012 Share Posted October 28, 2012 Basically i plugged in my ux1, got the red light of screw you from it, installed all recent drivers, got the green light of thanks sucka, downloaded the pod farm, opened logic... and nothing happens. Logic will not recognise it Pod Farm will not recognise it My macbook will not recognise it But still... it has the green light Any tips, advice from personal experience would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
JapanAxe Posted October 28, 2012 Share Posted October 28, 2012 Try this: In Finder, go to Applications > Utilities > Audio MIDI Setup, select the Audio window. If you can see the device there, left click on it to highlight it, then right click on it and select 'Use this device for sound input', same again for sound output if you need to. Quote Link to comment Share on other sites More sharing options...
JapanAxe Posted October 28, 2012 Share Posted October 28, 2012 Just had a look at the manual [url="http://line6.com/data/6/0a06434d106fc4f74a3fc1ce65/application/pdf/POD%20Farm%202.5%20Basic%20User%20Guide%20-%20English%20(%20Rev%20C%20).pdf"]here[/url]. Seems to be a bit more going on here, in that the software itself governs whether the interface works as standalone or a plug-in. Reached the boundaries of my known universe now... Quote Link to comment Share on other sites More sharing options...
zranyard Posted October 29, 2012 Author Share Posted October 29, 2012 Yeah I read something like that on another forum actually, thanks for the advice though. I think I may just give in and buy something new... Quote Link to comment Share on other sites More sharing options...
RAY AGAINST THE MACHINE Posted October 29, 2012 Share Posted October 29, 2012 I get the 'not connected' notice as soon as I open my pod farm.( you have the same system as me) I normally quit , and then reopen and all is well. What you could do, is go to top left hand corner of podfarm preferences and basically click all the input /output options and it should work. There is a white noise testing device in there too. Can't say anymore as I'm at work and my mac is at home.) Quote Link to comment Share on other sites More sharing options...
Dood Posted October 31, 2012 Share Posted October 31, 2012 Firstly, have you updated or do you already have Mountain Lion on your Mac? If the answer is yes, then take a ticket and join the queue. There's quite a list of upset customers on the Line 6 forum with open tech support tickets for devices that are failing to connect, or drop out, or glitch since updating to Mountain Lion. I can run you through set up as I have a UX1 too, but it may not help if the answer to the question above is in the affirmative :0$ Quote Link to comment Share on other sites More sharing options...
zranyard Posted October 31, 2012 Author Share Posted October 31, 2012 Yea i do have mountain lion, why the hell does this stuff happen when apple release a new OS?! Thanks a lot guys for your advice, I went out and got a new interface today because I can't wait any longer! Quote Link to comment Share on other sites More sharing options...
Low End Bee Posted October 31, 2012 Share Posted October 31, 2012 (edited) I had a problem with my iMac seeing my Line 6 KB37 when I updated to Mountain Lion too. From memory I downloaded the Monkey driver again from Line 6 and it worked fine for a few months now. Edited October 31, 2012 by Low End Bee Quote Link to comment Share on other sites More sharing options...
zranyard Posted October 31, 2012 Author Share Posted October 31, 2012 Yea i really don't know, I've had problems before, updating and reinstalling drivers etc would sort it out. But not this time... Quote Link to comment Share on other sites More sharing options...
Dood Posted October 31, 2012 Share Posted October 31, 2012 Ok, been having a chat with tech support - try this - go to Applications > Line6 > Drivers folder and use the uninstaller to remove them. reboot machine. then go to Line6 and get the 7.1.7 driver, not the latest driver and install that instead. I'm testing the driver on mine and so far it *seems* to be behaving. Whilst I was at it, I reinstalled the UX1 firmware too just to be sure. There's a whole lot more that tech support have sent me, but it is a known fault that they are trying to sort out. Good luck, I will post my findings. P.s. what interface did you buy? I might get another too! Quote Link to comment Share on other sites More sharing options...
Dood Posted October 31, 2012 Share Posted October 31, 2012 p.s. don't use Monkey as it will get the latest driver - go to the downloads section of the Line 6 website to scroll through to the previous driver 7.1.7. Quote Link to comment Share on other sites More sharing options...
zranyard Posted November 3, 2012 Author Share Posted November 3, 2012 Awesome thanks a lot, I'll give it a try. Its an M-audio something, can't remember what model but probably the cheapest one they do, just a single input interface, although it does have phantom power! Quote Link to comment Share on other sites More sharing options...
Dood Posted November 5, 2012 Share Posted November 5, 2012 Thank you! - UX1 has bad been behaving, but just turned itself off - no light, no nothing! piece of poo! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.