jezzaboy Posted November 2, 2012 Share Posted November 2, 2012 (edited) I have here an Epi T bird. I will sell complete or will part it out. Made in China, I decided to paint it red then black (forgive me, it was a phase I was going through-mid life crisis!) I did it with Halfords paint and from a distance it looks ok but it is far from proffesional. There are a couple of dents/dings on the front around the vol knob/rear pickup area but they are marks in the paint and a couple of filled holes where I moved the strap buttons on the back. There is a small chip out of the rosewood board on the last fret. There is also a few chips on the end of the headstock. I have fitted an ebony thumbrest between the pickups and chrome knobs on the pots as one of the original plastic knobs broke. The bass plays fine and has a very powerful output. The frets are in great condition, the tuners are smooth and hold their tuning well and the electrics work perfectly. It would be a good Fenderbird project, a back up or a beat the crap out of it rock bass. There are a few options I was thinking about: Buy the complete bass. If you collect it from me £75. Delivered £85 but I will remove the neck before posting. Complete body with bridge, pickups and pots £55 collected, £65 delivered. Neck with plate and tuners £35 collected, £42 posted. I am in Paisley just outside Glasgow. Any question give me a shout. [attachment=122615:SAM_0550.JPG][attachment=122617:SAM_0553.JPG] [attachment=122616:SAM_0551.JPG] Please note: I`m gonna keep it the now. Edited November 3, 2012 by jezzaboy Link to comment Share on other sites More sharing options...
Recommended Posts