TBBassist2011 Posted November 18, 2012 Share Posted November 18, 2012 (edited) Hi everyone, I've decided on getting a TC Electronic BH500 head but I'm struggling on choosing a cab. I tried the head through a Ashdown 410T Deep, and loved the sound but found that the cab was only 450w and don't want to risk blowing it. After a bit of searching online I found the Fender Rumble 410, which would handle the power but I have no experience with. I was wondering if anyone on here has a similar rig or any experience with the Fender cab or if I should go for a higher watt Ashdown, and any recommendations? Cheers, Nick Edited November 18, 2012 by TBBassist2011 Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted November 19, 2012 Share Posted November 19, 2012 Well the blurb rates the BH500 at 500 watts at 4 ohms, so assuming the Ashdown is an 8 ohm cab, you`ll be getting less than that, so you should be fine. Even if it were a 4 ohm cab, I doubt you`d need the full 500 watts anyway, so it`s unlikely you`d be pushing the cab, unless you really put a lot of lows through it. Quote Link to comment Share on other sites More sharing options...
xgsjx Posted November 19, 2012 Share Posted November 19, 2012 If you like the Ashdown, go for the Ashdown. If you get to a volume that sounds bad, back off on the low end or get a 2nd cab (unless you go for a 4 ohm cab, then you're stuck). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.